(0)

Questions? Call Us:
800-356-5844

Radio Design Labs ST-VP1
Voice Over/Paging Mixer

OUR PART #:  STVP1

Radio Design Labs' ST-VP1 is part of a group of products in the STICK-ON series from Radio Design Labs.
Learn More
Our Price: $140.02
List Price: $187.29
You save 25%!
Write the first review.

Full Compass offers free ground shipping on thousands of stock and non-stock (special order) items for orders placed on this web site and shipping in the continental US (48 states).

Learn More

Free Shipping

Available

We guarantee to match pricing on the products we sell for new, identical and immediately available products if you see them offered at a lower price. Please contact us if you find a lower price before purchasing.

Learn More

Low Price

Guaranteed

Radio Design Labs ST-VP1
Qty:
Usually ships in 7-14 business days.
Need it sooner? Call us!

Similar Products

Radio Design Labs' ST-VP1 is part of a group of products in the STICK-ON series from Radio Design Labs. The durable bottom adhesive permits quick, permanent mounting nearly anywhere, or use it with RDL's racking accessories. The ST-VP1 offers the ultimate in quality preset mixing functions for voice-over and paging applications, with the big PLUS...you can put it right where you need it.

NOTE: Radio Design Labs' PS-24AS power supply is NOT included but is required in order to power this product.  Please see the "Accessories" tab or click here for more information on the PS-24AS power supply.

The exceptional audio quality together with the reasonable cost of the ST-VP1 make it equally useful in voice-over studio recording applications and in paging installations. The module is a line-level device with two inputs: MUSIC and VOICE. The MUSIC input normally feeds the output when no control option is selected. Two control options are available: FADE and CUT. When FADE is externally selected (pulled to ground), the Music source is faded down, and the Voice source is turned on. When the FADE terminal is released, the Voice source is turned off and the Music source fades back up. The fade rate and fade depth are both adjustable on multiturn trim pots. When the CUT terminal is selected (pulled to ground), the Music source is switched off and the Voice source is switched on. When the CUT terminal is released, the Voice source is switched off and the Music is restored. All switching and fading is accomplished electronically for noiseless operation.

The ST-VP1 can be wired to constantly feed a line-level input of a paging amplifier. A line-level music source feeds into the module. A line-level Voice source also feeds the module...this may be a telephone paging signal at line level, or a microphone which has been preamplified up to line level (See RDL STM-1, STM-2, STM-3 Microphone Preamplifiers). If the professional sound of music fading under the page is desired, the FADE terminal is used to select the page function. If a hard cut is desired to get people's attention for emergency pages, the CUT terminal can be used. Innovative systems can be created by cascading modules for prioritized messages. For example, two units could be used...one to operate the music fade for insertion of messages from a message repeater, with this module output feeding a second ST-VP1 used in the CUT mode for paging. In this way messages can be professionally mixed with background music, while attention-getting pages always take priority.

Many recording applications, such as narrations or commercial announcements, as well as on-air broadcast uses can be enhanced by uniform voice-over audio levels and fades. The superb audio clarity of the ST-VP1 makes it useful as the final mix device in this type studio. Using the ST-VP1 to mix the studio mic in after the studio mixer output can permit processing of the mic signal separate from the studio mixer. The ST-VP1 can be used together with other STICK-ON modules for creative control. Microphone signals can be tailored and controlled with modules such as the STM-2 Preamplifier, ST-EQ3 Equalizer and ST-CL1 Compressor/Limiter. Control of the ST-VP1 can be made convenient for announcers by using a lighted momentary push button together with an ST-LCR2 Alternate-Action relay for control. The ST-VP1 can be the heart of many innovative systems in quality voice recording and broadcasting.

Rackmount System for 12 Stick-On Units
Radio Design Labs STR-19A Rackmount System for 12 Stick-On Units
Radio Design Labs' STR-19A Racking System holds up to 12 STICK-ONs in a 19" rack and only occupies two rack spaces.
136.70 182.87 25

In Stock
Free Shipping Available
24 VDC 500mA Switching Power Supply, North American Model
Radio Design Labs PS-24AS 24 VDC 500mA Switching Power Supply, North American Model
Radio Design Labs' PS-24AS is a 24 VDC/500 mA switching power supply with a North American AC plug. Compatible with various RDL products.Radio Design Labs PS-24AS Specifications: Input: 100 to 240 VAC Output: 24 Vdc, 500 mA (UL, ...
23.40 31.28 25

In Stock
Din Rail Adaptor for STICK-ON
Radio Design Labs DRA-35S Din Rail Adaptor for STICK-ON
The DRA-35S is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module. The oblique mounting angle of the DRA-35S allows an installer to mount several STICK-ON modules to a single DIN rail. Access to ...
19.40 22.89 15

In Stock
Mounting Kit for STICK-ON, TX, or Rack-Up module
Radio Design Labs MB1-RDL Mounting Kit for STICK-ON, TX, or Rack-Up module
Two mounting brackets mounts a STICK-ON, TX, or Rack-Up module to a flat surface.
3.46 4.08 15

In Stock
Rackmount Kit for 10 Stick-On Units
Radio Design Labs STR-19B Rackmount Kit for 10 Stick-On Units
Radio Design Labs' STR-19B Racking System holds up to 10 STICK-ON unitss in a 19 inch rack and only occupies two rack spaces. The STR-19B holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or ...
162.53 217.40 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
Free Shipping Available
Mounting Frame for Stick/TX
Radio Design Labs SR-4 Mounting Frame for Stick/TX
Radio Design Labs' SR-4 is a universal module chassis that can mount to a backboard, wall or nearly any other support. It provides mounting for 4 STICK-ON power amplifiers or 7 standard STICK-ON modules. TX ™ modules may also be mounted. ...
84.88 113.53 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
Stick-On Mounting Rack for 10 Units
Radio Design Labs SR-10 Stick-On Mounting Rack for 10 Units
Radio Design Labs' STR-10 Racking System holds up to 10 STICK-ON units.  It holds STICK-ONs at an angle allowing for control adjustment from either the edge of a STICK-ON, or the top (depending on where the adjustment is located on ...
65.41 87.48 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
STICK-ON Series 19"W Mounting Rack for up to12 Modules
Radio Design Labs SR-12A STICK-ON Series 19"W Mounting Rack for up to12 Modules
Radio Design Labs' SR-12A chassis can be mounted in a rack or on a backboard to provide mounting of 12 STICK-ONs.
65.41 87.48 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
Mounting Bracket for up to 4 STICK-ON Modules
Radio Design Labs ST-PBR4 Mounting Bracket for up to 4 STICK-ON Modules
Radio Design Labs' ST-PBR4 is a mounting frame with slots for four STICK-ON modules.  The ST-PBR4 mounts on an FP-PSB1A power supply bracket or to any flat surface.  The ST-PBR4 design allows the installer to secure the modules ...
34.59 46.27 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
6 Stick-On DIN Rail Adapter Modules
Radio Design Labs DRA-35S-6 6 Stick-On DIN Rail Adapter Modules
Radio Design Labs' DRA-35S-6 is a 35 mm DIN rail mounting bracket that provides positive mounting for any RDL STICK-ON® module.  The oblique mounting angle of the DRA-35S allows an installer to mount several STICK-ON modules to a ...
32.87 38.78 15

Usually ships in 7-14 business days.
Need it sooner? Call us!
Mounting Strip for STICK-ON Units
Radio Design Labs Smk 12 Mounting Strip for STICK-ON Units
The SMK-12 allows removable surface (up to 6 units) or edge (typically 12, max. 16) mounting of STICK-ON units. They can be fastened to its surface using screws or adhesive foam pads.
28.01 37.45 25

Usually ships in 7-14 business days.
Need it sooner? Call us!
Mounting Bracket for STICK-ON Modules
Radio Design Labs ST-RRB1 Mounting Bracket for STICK-ON Modules
Radio Design Labs' ST-RRB1 mounting kit contains a bracket to attach a STICK-ON module to a rear rack rail or to any flat surface. The module slides into the holder and snaps into position. The module may easily be removed.
22.67 26.74 15

Usually ships in 7-14 business days.
Need it sooner? Call us!
Detachable Terminal Block
Radio Design Labs Dtb Rdl Detachable Terminal Block
Use DTB's to quickly detach and reattach wiring harness to STICK-ON units.
6.92 8.16 15

Usually ships in 7-14 business days.
Need it sooner? Call us!

Click to download

To be the first to review this item, click here.

Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2017 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.