Henry Engineering MICROMIXER Four-Input Stereo Mixer

MicroMixer is a 4-input, 2-output stereo mixer for line-level sources. MicroMixer is a perfect utility mixer with numerous uses: combining 2 stereo sources to a stereo output; combining up to 4 mono sources; mixing mono and stereo sources to a stereo output. Each balanced bridging input will accept a balanced or unbalanced source.

A level control for each input provides adjustment from OFF to +10dB of gain. "Micro Assign" switches permit any input signal to be routed to either the Left, Right, or both outputs. Audio inputs and outpus are on plug-in euroblock connectors.

MicroMixer is 1/3 rack width and can be mounted in an optional rack shelf, or wall mounted with optional wall/cabinet mounting brackets. MicroMixer is powered by an internal AC power supply.

Henry Engineering MICROMIXER Specifications:

• Input Levels: -10 to +8 dBm
• Input Impedance: 20K ohms bal, 10K ohms unbal
• Output Level: +4 dBm nominal, +26 dBm max
• Output Load: 600 ohms or higher per output, bal
• Controls: Input gain, Output assign
• Gain: OFF to +10 dB
• Frequency Response: DC to 20 kHz, 0.25 dB
• Distortion: < .01% IM/THD
• Noise: >80 dB below nominal output, typ
• Power Requirements: 115/230 VAC, 50/60 Hz, 3 W
• Construction: Steel enclosure
• Mounting: Table top, optional rack mount shelf, optional wall/cabinet mounting brackets
• Approval: City of Los Angeles Elect. Test Lab
• Dimensions (W x H x D): 5.7" x 1.7" x 6.0"
• Weight: 3.0 lbs.