(0)

Questions? Call Us:
866-334-8859

Switchcraft 188
Heavy Duty 1/4" Phone Plug

OUR PART #  188

Our Price: $3.73
List Price: $5.54
Save up to 44% when you order by quantity!
Buy 25 @ $3.60 ea.
Buy 50 @ $3.34 ea.
Buy 100 @ $3.08 ea.
(Low Price Guarantee)
In Stock

Features:

  • Switchcraft's 188 is more heavy-duty than our competitor's biggest 1/4" commercial phone plugs.
  • Large curved tip solder terminal makes it easier to solder to heavy gauge wires.
  • Longer sleeve terminal allows more room to make sleeve solder connections.
  • Extra-large cable clamp securely grips cable of up to .450" in diameter.
  • Will easily accommodate some varieties of four conductor 14 gauge wire and parallel two conductor 12 gauge wire.
  • Bendable tab on sleeve terminal makes termination easier by holding down cable while soldering. In addition, such mechanical retention makes for a superior solder connection.
  • Will handle up to 15 A. rms (maximum).

Specifications:

  • Contact Resistance (typical Dependent on MatingJack):< 0.020 ohms
  • Dielectric Withstand Voltage: 500 VAC (minimum)
  • Insulation Resistance @ 500 VDC: 2,000 megohms(minimum)
  • Insulation Resistance (after MIL-STD-202 Salt Spray):1,000 megohms (minimum)
  • Working Voltage: 250 VAC, 140 VDC
  • Current Carry @ Working Voltage (typical Dependent onMating Jack) : 15.0 AMPS
  • Insert/Withdrawal Force: Dependent on Mating Jack
  • Soldering Requirement: ANSI/J-STD-001
  • Temperature Range: -40° to + 85° Centigrade
  • U.L. Component Recognition File No.: E118169
  • Life: Dependent on Mating Jack
  • Maximum Cable Size: 12 AWG stranded, up to .450"diameter
  • Tip: Nickel-plated copper alloy
  • Sleeve: Nickel-plated copper alloy
  • Handle: Nickel-plated copper alloy
  • Tip Terminal: Copper alloy, electrotin-plated
  • Cable Clamp: Copper alloy, electrotin-plated
  • Insulators: Thermojet plastic, thermoplastic, thermoplasticfilm, P.P.O.

Switchcraft 188
Heavy Duty 1/4" Phone Plug

OUR PART #  188

Product Information:

Features:

  • Switchcraft's 188 is more heavy-duty than our competitor's biggest 1/4" commercial phone plugs.
  • Large curved tip solder terminal makes it easier to solder to heavy gauge wires.
  • Longer sleeve terminal allows more room to make sleeve solder connections.
  • Extra-large cable clamp securely grips cable of up to .450" in diameter.
  • Will easily accommodate some varieties of four conductor 14 gauge wire and parallel two conductor 12 gauge wire.
  • Bendable tab on sleeve terminal makes termination easier by holding down cable while soldering. In addition, such mechanical retention makes for a superior solder connection.
  • Will handle up to 15 A. rms (maximum).

Specifications:

  • Contact Resistance (typical Dependent on MatingJack):< 0.020 ohms
  • Dielectric Withstand Voltage: 500 VAC (minimum)
  • Insulation Resistance @ 500 VDC: 2,000 megohms(minimum)
  • Insulation Resistance (after MIL-STD-202 Salt Spray):1,000 megohms (minimum)
  • Working Voltage: 250 VAC, 140 VDC
  • Current Carry @ Working Voltage (typical Dependent onMating Jack) : 15.0 AMPS
  • Insert/Withdrawal Force: Dependent on Mating Jack
  • Soldering Requirement: ANSI/J-STD-001
  • Temperature Range: -40° to + 85° Centigrade
  • U.L. Component Recognition File No.: E118169
  • Life: Dependent on Mating Jack
  • Maximum Cable Size: 12 AWG stranded, up to .450"diameter
  • Tip: Nickel-plated copper alloy
  • Sleeve: Nickel-plated copper alloy
  • Handle: Nickel-plated copper alloy
  • Tip Terminal: Copper alloy, electrotin-plated
  • Cable Clamp: Copper alloy, electrotin-plated
  • Insulators: Thermojet plastic, thermoplastic, thermoplasticfilm, P.P.O.
Add to Cart

We're sorry, only of this item available



Call a Sales Pro at 800-356-5844 for more information

© 2016 Full Compass Systems, LTD  9770 Silicon Prairie Parkway, Madison, WI 53593  All rights reserved.

We are not responsible for typographical errors in pricing or product specification
inaccuracies in our catalog or web site. Prices are subject to change without notice.