GearCast Video - QSC K-Series Powered Loudspeakers for Musicians

QSC's K10 is a lightweight powered loudspeakerDefinition:
A loudspeaker with a built-in power amplifier. that features a 1000 Class D power module and is fitted with an identical wooferDefinition:
A low-frequency driver or speaker. and a 1.75" HF transducerDefinition:
A device that converts mechanical energy to electrical energy, or vice-versa. For example, microphones, loudspeakers, and guitar pickups are all transducers. . The K10 also features auto-standbyDefinition:
1. A command in media production meaning everything is ready, and to await further instructions. 2. The state where a camera or other recording device is armed and ready to record. mode, XLR & 1/4" TRSDefinition:
(Tip Ring Sleeve) Phone style connector. 3 conductor (Stereo) originally 1/4" diameter, also 1/8" and smaller and the TT style for patchbays. Used for headphones and patching. mic/line level ins, RCADefinition:
(Radio Corporation of America) Known for the (RCA) phono plug and jack, among many other inventions. See Phone Plug. See Phono Jack. phonoDefinition:
Short for phonograph. ins, direct outs on each channelDefinition:
1. In radio, television, citizen's band radio, and other wireless communications modes, a specific frequency for communication. 2. In mixers and video, an input or output signal path with controls. 3. In MIDI, one of 16 data paths., a balanced out for daisy-chaining up to three sources and extensive DSPDefinition:
1. DSP (Digital Signal Processor): An integrated circuit or device that mathematically alters sound or video signals. 2. DSP (Digital Signal Processing): The technique of converting an analog signal into digital data, manipulating that data, then producing an analog output that reflects the changes caused by these manipulations done in the digital domain. processing. EQ settings for both the high-freq. and low-freq. transducers are adjustable on each unit. LEDs can be set to show when the unit is on or when its clip limiterDefinition:
A form of compressor with a ratio of infinity:1 above the threshold for both overload protection, or as a sound effect to normalize volume. Some engineers consider a compressor with a ratio of 20:1 or higher above the threshold a limiter. has been engaged. The extended bass LF setting allows for integration of an external subwooferDefinition:
A low-frequency speaker, typically optimized for response below 120 Hz, for augmenting full-range sound systems. into the sound system.