GearCast Video - EBS Billy Sheehan Signature Bass Overdrive Pedal Guide

The Billy Sheehan Signature Drive pedal is developed by EBS in close co-operation with Billy himself. It is based on the concept of mixing together a clean signal with a distorted to be able to preserve low frequencies and find balance between distortionDefinition:
A change in an electronic or acoustic signal's waveform. This can undesirable if it impacts signal quality, or desirable when used for creative signal processing. and definition.

The option to add compressionDefinition:
1. Reducing the dynamic range of an audio or video signal for consistency, to keep it from exceeding the available headroom, or providing a special effect. 2. With data, using a process to reduce the amount of data. Compression can be lossless, where decompressing replicates the original signal, or lossy, where compression occurs by judging some data as unnecessary, and can therefore be discarded from the file. make possible to keep the note differentiation clearly audible even at heavily distorted sounds. There are three modes for the buil-in compressorDefinition:
A device that reduces dynamic range by a certain ratio, and used primarily for audio signals., High, Mid and Off. For the Mid setting, there's an additional trim potDefinition:
Short for Potentiometer. See Potentiometer. inside to set the level. There's also a trim pot to set the Threshold for the compressor.

The Billy Sheehan Signature Drive offers unlimited pre-post mix tone shaping, made possible by including a clean loopDefinition:
1. To re-record dialog over video. See ADR. 2. To replay a portion of audio or video content. 3. (sampling) To repeat a section of a waveform so that it can sustain indefinitely. 3. To repeat a phrase or section of sound multiple times within a composition or recording. and a drive loop. It lets the user insert any other effect they wish within each loop to ’pimp’ the effect into your own signature effect! For example, connect an external EQ to the Drive Loop and shape the character of the distortion any way you want. Or, turn off the built-in compressor if you prefer to use a different type of compressor and put in the Clean Loop.