Focusrite Saffire PRO 26 Firewire and Thunderbolt Audio Interface – Recording Anavae

Focusrite Saffire PRO 26 Firewire and Thunderbolt Audio Interface – Recording Anavae
Focusrite Saffire PRO 26 Firewire and Thunderbolt Audio Interface – Recording Anavae | Full Compass
8,473 viewsVideo Like 18
By Full Compass Live
Copied to clipboard

The Saffire PRO 26 is part of Focusrite’s family of professional studio-quality Firewire/Thunderbolt compatible* audio interfaces, with full 24-bit/96kHz conversion and four award-winning Focusrite mic preamps with phantom powerFullcompass LogoDefinition:
A source of power for a microphone (usually condenser) that travels to the microphone over the microphone's cable. There are different voltage standards and requirements for different microphones, but the most common standard is 48 Volts. It derives its name because there is no visible power cable.
. The best-sounding interfaceFullcompass LogoDefinition:
A device that adds I/O capability to another device. Common would be a MIDI, audio or video interface for a computer
in its class, Saffire PRO 26 was designed with both studio recording and liveFullcompass LogoDefinition:
Live broadcast of an event or program without substantial delay or editing.
musicians in mind, offering extensive input and output capabilities for maximum flexibility.

Twenty-five years of mic preamp excellence form the foundation of the Saffire PRO 26 interface. The four preamps, along with the very latest in mix control software and interfacing technology, combine to deliver seamless integration, excellent routing flexibility and rock-solid driverFullcompass LogoDefinition:
A system software routine that provides a means of communication between a computer and an associated peripheral (audio interface, hardware controller. etc.). Drivers are updated often for improved efficiency, or compatibility with newer operating systems.
stability.

At the heart of Saffire PRO 26 lie four award-winning Focusrite preamps. These allow unparalleled recording flexibility and ensure low noise and distortionFullcompass LogoDefinition:
A change in an electronic or acoustic signal's waveform. This can undesirable if it impacts signal quality, or desirable when used for creative signal processing.
with plenty of headroomFullcompass LogoDefinition:
1. The safety margin for an electronic signal that accommodates peak signals without overload. It is the difference (in dB) between normal operating levels (0-VU) and the clipping (overload) point. 2. The space between a subjects head or top and the top edge of a screen frame.
to captureFullcompass LogoDefinition:
To acquire audio and/or video, and convert it to a file.
the full dynamic rangeFullcompass LogoDefinition:
1. Range in dB between a device's noise floor and its maximum available headroom. 2. The difference between the maximum and minimum volume levels that occur in a musical performance.
of even the loudest drumkit or guitar ampFullcompass LogoDefinition:
Abbreviation for either Ampere or Amplifier.
. Precision digitalFullcompass LogoDefinition:
A signal or data expressed as series of the digits 0 and 1, typically represented by values of a physical quantity such as voltage or magnetic polarization.
conversion and JetPLL™ jitter-elimination technology maintain pristine audio quality in both analogFullcompass LogoDefinition:
A signal that is continuous in nature, as opposed to being defined as a series of discrete numbers (or elements) as found in digital signals; electrically "analogous" to an acoustical signal in the air.
and digital domains.

Inputs 1 and 2 are available both as mic-level rear-panel XLRs and as front-panel TRSFullcompass LogoDefinition:
(Tip Ring Sleeve) Phone style connector. 3 conductor (Stereo) originally 1/4" diameter, also 1/8" and smaller and the TT style for patchbays. Used for headphones and patching.
(1/4 inch) sockets at line or instrument levels, and include 8dB pads. Inputs 3 and 4 appear on the rear panel as combo XLR (mic)/TRS (line) sockets. There are two additional rear-panel TRS line inputs, making a total of six analog inputs, for which 5-segment LEDFullcompass LogoDefinition:
LED (Light-Emitting Diode): A semiconductor light generator used in displays, television, pointers and for general illumination. It is a low-power replacement for incandescent lamps.
metering is provided.

The PRO 26 includes S/PDIFFullcompass LogoDefinition:
(Sony/Philips Digital Interconnect Format) A protocol for a stereo digital audio connection, based on AES3, that uses coaxial cable or TOSlink optical cables.
I/OFullcompass LogoDefinition:
(Input/Output): 1. A pair of connections that provide input(s) and output(s). 2. The connections that link a computer to devices outside the computer.
, and an optical digital input that can be configured either as S/PDIF or as ADATFullcompass LogoDefinition:
(Alesis Digital Audio Tape): An S-VHS tape-based, 8-track digital audio recording format, syncable with additional units to add tracks in groups of 8.
format, the latter allowing expansion of the interface with, for example, Focusrite’s OctoPre MkII, for a total of 14 analog inputs. Saffire PRO 26 also features two virtual Loopback inputs, for routing digital audio between software applications — ideal for capturing online audio.

On the output side, dual headphone outputs, six line outputs on TRS jacks, and S/PDIF coax are provided. Main monitorFullcompass LogoDefinition:
1. (audio) A loudspeaker or headphone/earphone used for accurate reference monitoring for recording or broadcast. 2. (live performance) A device that reproduces sound, like an in-ear monitor or speaker wedge, so performers can hear themselves. See
IEM. 3. (computers) A device that provides a graphic representation of operations occurring inside the computer. 4. video) A device that enables seeing what is occurring with a video shoot, or program material from a broadcast or other video media source. controls, including volume, dim and muteFullcompass LogoDefinition:
1. To silence or squelch an audio signal. 2. A switch that silences a signal.
, are included on the front panel.

Saffire MixControl, the ultra-low-latencyFullcompass LogoDefinition:
The amount of delay a signal, data, sound, video, or control signal acquires within a device, system, or long-distance connection.
26 x 8 DSPFullcompass LogoDefinition:
1. DSP (Digital Signal Processor): An integrated circuit or device that mathematically alters sound or video signals. 2. DSP (Digital Signal Processing): The technique of converting an analog signal into digital data, manipulating that data, then producing an analog output that reflects the changes caused by these manipulations done in the digital domain.
mixer/router software provided with Saffire PRO 26, sets a new standard for audio interfaceFullcompass LogoDefinition:
A device to convert audio signals into digital code suitable for use by a computer; typically communication occurs through a port such as USB, Thunderbolt, FireWire, etc.
control. It features flexible output routing and monitoring, as well as intuitive one-clickFullcompass LogoDefinition:
To press one of the switches on a computer's mouse to initiate a function or modify a parameter. See Mouse.
setup solutions designed to help you track, monitor and mix as quickly as possible.

Featured Brands

  • Focusrite

Related Posts