Truss and Rigging

For 16" square truss, 12" square truss & 12" triangular truss.

The steel 30" x 30" heavy duty base plate can be used with either the Show Solutions 12" or 20.5" SP Pro Series squared truss.Image is for illustrative purposes only.

Specifications: Overall Width: 11-7/16" (290 mm)Outer Diameter Tubing: 2" (50 mm)Diagonal Bracing: 0.75" (20 mm)Wall Thickness: 0.008" (2 mm) Unit Weight: 15 lbs.

Specifications: Overall Width: 15.75" (290 mm)Outer Diameter Tubing: 2" (50 mm)Diagonal Bracing: 1" (20 mm)Wall Thickness: 0.12" (2 mm)Unit Weight: 46 lbs.

Specifications: Overall Width: 15.75" (290mm) Outer Diameter Tubing: 2" (50mm) Diagonal Bracing: 1" (20mm) Wall Thickness: 0.12" (2mm) Unit Weight: 81 lbs.

16" x 16" aluminum base plate for square truss.  Unit Weight: 5 lbs.

1.64ft I-Beam segment.  Fabricated by certified TUV welders.  Equipped with connecting hardware. 11 7/16" over width 2" outer diameter tubing 3/4" diagonal bracing 0.08" wall thickness

2.46ft I-Beam segment.  Fabricated by certified TUV welders.  Equipped with connecting hardware. 11 7/16" over width 2" outer diameter tubing 3/4" diagonal bracing 0.08" wall thickness 

The ST-UJB/C2-12 is a half conical coupler with an allen bolt that allows you to add connection to the ST-UJB-12 junction block. Comes in a 4-pack. Unit weight: 1lb.

3m (9.84 ft.) Truss Cover for box trussing. 3.0m (9.848ft) Fire Retardant NFPA 701 Compliant Machine Washable Fabric Wrinkle Ressitant Fabric Secures with Velcro 

1m (3.28 ft.) Truss Cover for box trussing. 1.0m (3.28ft) Fire Retardant NFPA 701 Compliant Machine Washable Fabric Wrinkle Ressitant Fabric Secures with Velcro 

Bases are generally used in conjunction with standard iron pipe to create a variety of stands or supports. The B-10 base is generally used without pipe, that is, a fixture is directly mounted to the base. Bases may also be used as weights ...

Adjustable Stands are used to support lighting fixtures or other equipment from the floor. When a crossbar is added to the top of a stand, the combination becomes a light tree which will allow for the mounting of two or more fixtures, ...

The GridLink™ Rigging Beam System provides the foundation for building quick and reliable loudspeaker suspension grids using predictable load-rated, modular and off-theshelf components. Cabinets are suspended then aimed precisely and ...

ATM Fly-Ware maintains a comprehensive inventory of standard length wire rope slings and in a variety of diameters to accommodate various working load requirements. They are produced domestically and load rated to assure safe and ...

This unit is a TS1400 Motor, for use with the Draper TorkStar Utility Line lifting system.TorkStar is an inherently safe, simple lifting system designed to raise and lower a wide range of products commonly used on stages, in gymnasiums and ...

This unit is a drive shaft, for use with the Draper TorkStar Utility Line lifting system. TorkStar is an inherently safe, simple lifting system designed to raise and lower a wide range of products commonly used on stages, in gymnasiums and ...

This unit is a KS2DBL Operating Switch, for use with the Draper TorkStar Utility Line lifting system. It is a single gang double key switch.

This is a TS90 Parallel Beam Adapter Plate, for use with the Draper TorkStar Utility Line lifting system. For attaching to a steel beam that is parallel and directly above the Line Set. 

This unit is a MK500 Beam Mounting Kit, for use with the Draper TorkStar Utility Line lifting system. For attaching to steel beam that isperpendicular to the Line Set.