Splitters/Combiners, Microphone Level

Features: Combines (sums) two stereo CD or tape players into one mono (XLR or ¼ inch) output Frees mixer channels Phantom block on the XLR prevents phantom power from reaching CD/Tape players connected to the RCA jacksEver ...

The SP1X3 is a passive microphone splitter box with XLR inputs and outputs. It provides one direct and two transformer isolated outputs from a mic level input. Each transformer isolated output features a ground lift switch.

For splitting the signal from a low-Z balanced microphone between 2 mixers. Female XLR-type input. 2 male XLR-type outputs (Direct and Isolated). Isolated output has ground lift switch. Uses Pro Co MBT-1 transformer (150 ohm 1:1).

For splitting the signal from a low-Z microphone between 2 mixers. 4 channels, each with female XLR-type input and 2 male XLR-type outputs (Direct and Isolated). Isolated outputs have ground lift switches. Uses Pro Co MBT-1 transformers ...

The IMP-SPLITTER-1X2 provides one direct output and one transformer isolated output from a mic level input.  The transformer isolated output features a ground lift switch.

The S8 can be used to split eight balanced low impedance microphone signals into sixteen (eight pairs).Each channel of the S8 provides one direct output and one transformer-isolated output from a single microphone. Applications incude ...

The Jackaroo combination cable tester, signal generator, splitter, combiner, DI box, and more, is an indispensable audio "Aussie Army Knife" for studios, PA companies, repair shops, and contractors.Packaged in a sturdy 2U rack-mount ...

The AT8681 combines the output from two microphones into one channel. The balance control attenuates each microphone by 6 dB (typical) at midpoint.Features Professional XLR-type input/output connectors Can be installed anywhere in-line, ...

The ProSplit provides one direct output and one transformer isolated output from a single microphone. Applications include sending the direct output to the main or Front-Of-House mixer, with the second isolated output being sent to a ...

LA Audio's MS424 is a 4 channel 1 into 4 unity gain active microphone splitter in a compact 1U self powered case.  The MS424 is designed for applications where multiple feeds are required from one set of microphones without the ...

Add an additional microphone to the CORE PA5X140 (or other powered monitor) when all inputs are in use.Permits phantom power to go to both microphones if available from the console.Galaxy Audio's JIB/C is designed for those situations when ...

The S8-3WAY eight channel three way microphone splitter is ideal for live sound, recording and broadcast applications where microphone and XLR balanced line level input signals have to go to multiple mix locations.Each channel provides one ...

This versatile box is built with our premium TRSP-2 transformer for optimum durability. Features a phase reverse switch which flips the polarity of Input #2.Features: Use fewer input channels by combining two miclines into one Combine ...

Splits a microphone to two different inputs, like a CORE PA5X140 (or other powered monitor) and a console. Phantom block circuitry prevents interference from two different phantompower sources.The JIB/Y allows you to split a ...

The Pro Co Multiface MS-82 Eight- Channel Mic Splitter splits the signals from each of eight low-impedance microphones (or similar sources) into two outputs, enabling two microphone preamplifiers to be fed from one source. The primary ...

For splitting the signal from a low-Z microphone between 3 mixers. 4 channels, each with female XLR-type input and 3 male XLR-type outputs (1 Direct and 2 Isolated). Isolated outputs have ground lift switches. Uses Pro Co MBT-2 ...

Minor Cosmetic BlemishThe Whirlwind SPC8x series of passive microphone splitters are the ideal, expandable solution for permanent installations. Each unit provides 8 channels of mic level splitting circuitry in a single rack space unit. ...

 The DX16XI and DX16XT are high performance 16 channel 3 way audio signal splitter units. The DX16XI is a pure path split, whilst the DX16XT offers transformer isolated audio splits.Primarily designed for microphone signals, the ...

The DX16XI and DX16XT are high performance 16 channel 3 way audio signal splitter units. The DX16XI is a pure path split, whilst the DX16XT offers transformer isolated audio splits.Primarily designed for microphone signals, the DX16XI and ...

D8XI Analog D-Sub 25-pin 8 XLR Breakout TerminalThe D8XI audio break-out terminal offers robust and reliable break-out connection for either analog or AES/EBU digital audio signal material from D-Sub 25-pin to 8 female XLR ...