Remote Controls, Infrared Repeaters, Controllers

Addressable IR router.Features: RT8 requires a 782-00 power supply Requires RC68X Programmer A four-terminal plug-in connector, “IR RCVR INPUT”, permits connection of IR Receivers, Keypads,Controllers, etc.

The ideal companion to the RDL VCA modules where levels are to be controlled from a single remote location. It is designed to directly interface with the 3-wire control input of the VCA module. The RLC10K contains a high-quality 10 kO ...

License & hardware to allow multi-room instal of GLM.SE package.NOTE: Only valid with purchase or ownership of Genelec's GLM.SE Control Network hardware/software package.  Please consult your sales representative ...

IR READY FOUR SOURCE KIT. Xantech IRDY KITS contain the basic building blocks of every IR system. Select an IRDY KIT for either four or ten source components, and then match it with the right Xantech IR receiver for the job.Includes: (4) ...

A high-efficiency power supply specified to provide power to all Xantech IR products. A versatile plug has a locking indentation ring providing a secure connection to all Xantech IR connecting blocks. A small form-factor allows tighter ...

Model 172 utilizes the 291-00 IR receiver, which has an improved range and interference rejection. The 291-00 receives the IR signals from a remote, converts the signal to DC control signals and passes them to the RF/IR Injector where they ...

The Xtra Link 2 system provides full remote control operation of a satellite receiver, cable box or DVD player from a second room. IR control signals from the second room is sent to the main room by using the coaxial cable that carries the ...

Lowell's SCS8R-ASM rackmount sequencer provides time-delayed activation and de-activation of equipment with Alternate Sequence Mode (ASM) capabilities.  The unique Alternate Sequence Mode provides the opportunity to bypass ...

Kramer's PT-4iREX is an infrared signal repeater that can operate at distances up to approximately 250 feet (75 meters).  This model will allow the extension of infrared signals in areas where there is no direct line-of-sight for ...

Lowell’s RPSB-KP-ASM switch assembly provides a low cost/low voltage method of remotely activating equipment that is connected to a remote power control such as Lowell's RPC Series or a wide variety of sequence controllers.  ...

Lowell’s RPSB-M-R switch assembly provides a low cost/low voltage method of remotely activating equipment that is connected to a remote power control such as Lowell's RPC Series or a wide variety of sequence controllers.  ...

Kramer's C-A35M/IRR is an IR receiver cable designed as a companion to a Kramer infrared repeater such as the PT-4iREX.  It is used to connect an external remote IR receiver input.

Kramer's Internal IR Connection cable is an internal cable, connecting between the IR circuit and an external IR receiver.  On one side, it has a 3.5mm jack which fits through a 6.4mm hole on the rear panel that lets you connect the ...

Lowell’s RPSB-P switch assembly provides a low cost/low voltage method of remotely activating equipment that is connected to a remote power control such as Lowell's RPC Series or a wide variety of sequence controllers.  Includes ...

Lowell’s RPSB-K-R switch assembly provides a low cost/low voltage method of remotely activating equipment that is connected to a remote power control such as Lowell's RPC Series or a wide variety of sequence controllers.  ...

Lowell's MSM momentary switch module allows equipment connected to Lowell’s remote power control Series RPC or four-step sequencer Model SCS-4 to be switched from multiple locations.  The MSM is used between the RPC control and ...

Lowell's SCS-4RK 4-step rackmount keyswitch sequencer provides time-delayed activation and de-activation of equipment that is connected to Lowell Remote Power Controls and to a variety of accessory systems.  Slim, 1RU chassis ...

100 Watt rotary decora volume control.Features: Power handling: 100 W/channel RMS For use with an amplifier of equal or lesser power rating only Adjustable impedance matching for up to 8 speaker pairs (1,2,4,8 pairs) Almond, Black, ...

The ZC21 is a two zone connecting block. It is a simplified version of the 795 controller when only two zones are required. Can be used with a 791-44 amplified connecting block for common emitter expansion. Only to be used with single or ...

Kramer's FC-8 is a bi-directional RS-232 to WiFi (802.11b/g) interface.  The unit allows any RS-232 controllable device to be controlled through a wireless LAN connection.Features: RS-232 Interface (9-pin D-sub) Supports multiple ...