Remote Controls, Infrared Repeaters, Controllers

The REM-PACK-4 is a complete, pre-programmed remote control system including wiring accessories, IR to serial control modules, and push-button remote controls.  Features visual and auditory feedback, multiple label options, and ...

The REM-PACK-8 is a complete, pre-programmed remote control system including wiring accessories, IR to serial control modules, and push-button remote controls.  Features visual and auditory feedback, multiple label options, and ...

Remote control for the PCM-D50 recorder.

Push button and potentiometer control with a print trigger, flash synch button.Features: Full remote control of the camera functions and lens zoom/ focus/iris functions via RS-232C Facilitated operation with knob control of gain, ...

This remote device provides programmable program selection via contact closures for the dbx DriveRack 220i and 260 devices. It also provides contact closure programmable source selection, page assignment, or scene selection for the dbx ...

The RC680 from Denon is a wired remote control for Denon CD and MiniDisc players. It includes a 12-foot DB25 cable and works with the following Denon models: DNC630, 650F, DN-C680, DN-951FA, DN-961FA, and DN-981F.

The RLC3 is designed to directly interface with RDL® control modules which feature a 0 to 10 Vdc control input utilizing an external 10 k ohm resistive control, such as the ST-VCA2, RU-VCA2 and RU-VCA2D voltage controlled ...

This remote device provides programmable push-to-talk page assignment for the dbx ZonePro devices. It has DIP switches allowing identification with connection to the processing device via CAT 5 cable on RJ-45 connectors.

RPC-1 Series remote power controls may be combined with a variety of switches, modules, and/or sequential control devices to provide a versatile low-voltage method of turning specific equipment on and off from a remote location. The ...

The RLC2 is the ideal choice where levels are to be controlled from a single, or from multiple control locations, and visual level indication is desired.The RLC2 is designed to directly interface with RDL control modules, such as the ...

Ideal for zone paging applications Plugs directly into Atlas Sound RPM Series relay chassis Select 3 Amp or 5 Amp 24 VDC Relays Atlas Sound RLM-24 DPDT relays plug directly into RPM Series relay chassis, ideal for zone paging and speaker ...

Choose From Four Chassis Models Easy to Install Relay Chassis Modular Design Provides Configuration & Expansion Flexibility Select 3 Amp or 5 Amp 24 VDC Relays Atlas Model RPM-2 provides a convenient and economical way to wire 24V ...

While the CQ Series products can be remotely activated with any contact closure, Juice Goose produces RC-5 accessory line is an economical remote control and monitor device. The RC5-RM operates any Juice Goose CQ Series of sequenced ...

While the CQ Series products can be remotely activated with any contact closure, Juice Goose produces RC-5 accessory line is an economical remote control and monitor device. The RC5-WM operates any Juice Goose CQ Series of sequenced ...

LogiConverter is a general purpose control interface that eliminates the incompatibility between various audio and video equipment remote control circuits.LogiConverter has 4 opto-isolated inputs that control 4 isolated relay outputs. The ...

The RC68X programmer is an expanded version of the RC68 programmer with over 14,000 IR codes. It contains all the IR codes necessary to operate all the Xantech IR controlled components. Use it to program universal learning devices such as ...

The WP-4iR is an infra-red signal repeater that can operate at distances up to 75 meters.  This model will allow the extension of infra-red signals in areas where there is no direct line-of-sight for normal infra-red signal ...

Lectrosonics' RM gives you remote control of SM Series transmitters* using an audible tone delivered through the lavaliere microphone attached to the unit. Operating parameters on the transmitter can be set by holding the speaker on the RM ...

The SI 1015-8000 Single is a single channel infrared system package that provides coverage of up to 8,000 sq. ft.The SI 1015 modulator accepts line level input via an XLR connection and drives the SZI 1015 (medium area) and SZI 1029 (large ...

The SPLCDPS4 high current Smartpad LCD power supply powers up to four SPLCD SmartPad LCD controllers. It provides steady, regulated 16V DC, 3.12A power and is available in 120VAC-60 Hz or 240VAC-50 Hz.