Remote Controls, Infrared Repeaters, Controllers

NOTICE: This is a RENTAL ITEM.RENTAL means that the item was used in our rental department and is considered used. It is guaranteed by us to operate properly when you receive it. Presentation remote control with mouse function ...

These small IR receivers have been designed for mounting in very small spaces. They may be mounted under shelf edges, cabinet ledges, in wall speakers, etc. - anywhere an inconspicuous appearance is desired. The high sensitivity of these ...

The RC-F400S Remote Controller’s intuitive control panel features a large, easy-to-read OLED display, with full navigation and transport control and features like Power-On Auto Play. Audio and Sound FX files can be easily assigned to ...

The HDMIC5IR is a Point-To-Point HDMI and IR/CAT5 Extender. Extends high definition displays up to 120 feet (35 meters) from the source at 1080i and extends high definition displays up to 70 feet (21 meters) from the source at ...

Intelix DIGI-VGASD-IREYE receivers are used to receive IR signals and transmit them to Intelix DIGI-VGASD series extenders. DIGI-VGASD-IREYE receivers ensure full compatibility with Intelix twisted pair extenders, as well as the highest ...

282D is a standard output designer IR emitter. 10 pack.Features: Non-visible, high-output version Deep purple LexanTM shell Clear adhesive film included on emitter housing for attachment to IR window of controlled component Includes ...

Infrared Emitter (3.5mm M to IR Emitter Cable - 10ft.)

Allows The operation Of Virtually Any IR-Controlled A/V Component From Multiple Room Locations. High Sensitivity Enables Use Within A 40 Foot Range With Fast Reaction Time And Minimal Interference. Receive The IR Signal And Rebroadcast It ...

1/8" Mini Jacks For Power Supply Model PS-M12 And Up To Four F-1 Flashers Plug-Interface Device That Provides Connections For An M-1A Series Repeater, Four F-1 Flashers, And Power Supply Model PS-M12. Units Amplified Circuit Design ...

Manfrotto's 521PFI Focus/Iris remote controller is designed to control the operation of Panasonic DVX-100B and HVX-200 cameras and can be used in combination with 521P and 522P zoom remote for Panasonic cameras. Features: Focus and ...

Dinky Link Quick Connect IR receiver kit, black.Includes: (1) 480-10D Dinky Link (1) 789-44 Connecting Block (1) 781ERGPS Power Supply (4) 283D Visible Designer Emitters

The DL85K features a small IR reciever that has been designed for mounting in very small spaces. They may be mounted under shelf edges, cabinet ledges, in wall speakers etc. - anywhere an inconspicuous appearance is desired. The high ...

The 283D Blink-IR Designer Emitter contains a small Infrared LED housed in a miniature, designer styled, black appearing, injection molded plastic shell. Unlike other emitters, the 283D emits visible red light in addition to IR (infrared) ...

Remote relay switcher.Features: Six double-pole double-throw relays, 5 amps, 30 VDC rated Two normally open and 2 normally closed contacts per relay Six six-terminal screw-type plug-in connectors Requires 782ERGPS power supply and ...

The front panel of the RT2 features two pushbuttons with two associated LEDs. Upon initial power-up, the OFF mode is selected. Touching the other button de-selects OFF and immediately selects ON. An LED adjacent to each button shows which ...

LVC SeriesThe LVC series volume controls are UL listed, compact easy-to-install controls that provide precise level adjustment of single or multiple speaker lines. All models mount within a single gang E.O. box with minimum depth ...

The Rane SR 3 Smart Remote is a generic, wired, RS-485 remote control with a 31-position LED indicator, data encoder with built in push switch and a 98 x 64 pixel LCD display with a programmable backlight. The encoder can be locked out by ...

The TP-9 and TP-10 are a twisted pair transmitter and receiver set for composite or s-Video (Y/C) signals and unbalanced analog stereo or S/PDIF digital audio signals. The TP-9 transmitter converts the video and audio to a twisted pair ...

Connects four emitter ports and power supply to all Xantech infrared receivers and keypads. Four parallel emitter ports with 470 Ohm resistors drive 4 single or 4 dual emitters Quick-connect stereo mini jack for Xantech IR ...

The RP-S4 remote panel provides 4 push-button switches, mounted on a grey 'decorator' style cover plate, with a single-gang 'cut-in' style PVC electrical back-box and pre-wired pigtails. Features 4 double-pole/double-throw push-button ...