Remote Controllers

The PL-5 is a stylish and compact battery powered hand held remote controller for use with the Allen & Heath PL-4 wall plate which is equipped with an IR (infra-red) sensor. It has 14 user programmable buttons. Typically, these would ...

Sabine Navigators can be controlled from the front panel, the remote control software, or the NAVRC-100 Remote Contol Wall Panel. These attractive panels mount in standard 2-gang wall-boxes, and they provide control over several Navigator ...

The PL-12 is an ‘intelligent’ remote controller for use with the GR2 audio zone mixer. It provides the non-technical operator with local control of the music source selection and/or audio level. Up to two controllers may be ...

Remote Panel for the 9000 Series. Six programmable push buttons to activate Scene memory recall, Event activation or volume up/down (one input or output channel) Wiring: one shielded conductor to chassis Remote Volume terminals Max. ...

The RC4-ST is a wall-box mounted remote module designed to directly control an RDL ST-SX4 Audio Switcher Module. The ST-SX4 provides solid-state switching of one of four unbalanced audio inputs to a single unbalanced audio output. The ...

Fixed-Mount Dipole Antenna for Permanent Installation Provides 8 dB Gain Use with WT-4800 or WD-4800 Cable Type and Maximum Connection Distance: RG-6/U - 115 ft. (35 m) RG-11/U - 165 ft. (50 m)

The RCS4 is the ideal choice where sources are to be selected from a single or from multiple remote control locations, and visual indication is desired. The RCS4 is designed to directly interface with RDL control modules, such as the ...

The RC4-RU is a wall-box mounted remote module designed to directly control an RDL RU-SX4A Audio Switcher Module. The RU-SX4A provides solid state switching of one of four balanced/unbalanced audio inputs to a single balanced/ unbalanced ...

The Rane PR-2 is a 5-wire wall mount page assign remote control for use with the CP-64 and CP-52 processors. Selector logic is active low BCD with pull-up provided in the CP 64. It has two selector knobs for sending two page signals to any ...

The front panel of the RC2-ST features two pushbuttons with two associated LEDs. Upon initial power-up, source 1 is selected. Touching the other button de-selects source 1 and immediately selects source 2. An LED adjacent to each button ...

The RW8 is a remote level controller which can be used with the VCM-88C and Protea 24.24M. The RW8 is mounts as a wall plate using a standard 4-gang electrical box.There are eight channels and a master, each with a level control and an ...

PL-7 is a stand-alone or surface mounted LCD panel, which enables remote display of status information and text messages which can be stored in the recallable memory settings. The PL-7 can be embedded with PL-3 or PL-4 wall plates, ...

Optional Decora style wallplate remote controls provide for selection of source and adjustment of volume. One remote per zone connects to the master unit with ordinary CAT-5 cable and RJ-45 plugs.

The JBL Commercial® CSR series remote controls, including CSR-V, CSR-2SV, and CSR-3SV, can use analog DC voltage to provide logic control ranging from source selection and volume. Wired with Cat 5 cable with universally accepted RJ-45 ...

The JBL Commercial® CSR series remote controls, including CSR-V, CSR-2SV, and CSR-3SV, can use analog DC voltage to provide logic control ranging from source selection and volume. Wired with Cat 5 cable with universally accepted RJ-45 ...

The JBL Commercial® CSR series remote controls, including CSR-V, CSR-2SV, and CSR-3SV, can use analog DC voltage to provide logic control ranging from source selection and volume. Wired with Cat 5 cable with universally accepted RJ-45 ...

The JBL Commercial® CSR series remote controls, including CSR-V, CSR-2SV, and CSR-3SV, can use analog DC voltage to provide logic control ranging from source selection and volume. Wired with Cat 5 cable with universally accepted RJ-45 ...

The JBL Commercial® CSR series remote controls, including CSR-V, CSR-2SV, and CSR-3SV, can use analog DC voltage to provide logic control ranging from source selection and volume. Wired with Cat 5 cable with universally accepted RJ-45 ...

The JBL Commercial® CSR series remote controls, including CSR-V, CSR-2SV, and CSR-3SV, can use analog DC voltage to provide logic control ranging from source selection and volume. Wired with Cat 5 cable with universally accepted RJ-45 ...