Phantom power supplies

Equipment that supports the AES 42 standard can process the output signals of Solution-D microphones directly.  In all other cases, the DMI-2 or DMI-8 digital microphone interface is used.  The DMIs convert the AES 42 data ...

The MZA 900 P phantom power adapter is used to connect pre-polarized condenser microphones with a 1/8" plug to microphone inputs with 10V- 52V phantom powering (P12 - P48). The connected microphone is supplied via the adapter. ...

Phantom Power Supply BLOX

48V phantom power supply - 2-channels, with power-adaptor.

The PPA (Phantom Power Adapter) is designed for connection of the OKM to 48volt phantom powered studio mixers or pre-amps. It provides optimum voltage for the OKMs, and transformer isolated balanced mic level inputs. The improvement in ...

 Power Supply For TR50 Lavalier Mics With A 4pin Lemo Connector & Wired For Vega Wireless Systems, Negative Bias  

Phantom power supply for use with Whirlwind DSC88. The DCSP1 is a regulated low-noise 48VDC power supply that can deliver up to 500mA. Each DCSP1 provides power for up to 96 microphones when used with the SPC series splitters.

P48V battery PSU, 9V battery, XLR3. For the CS-3e shotgun microphone.

Two channel phantom power supply for the CS-3E shotgun microphone. It operates with a 9-volt battery and provides +48 phantom power. The supply also features attenuation and a low-cut filter.

The P-41B is an AC power source that provides, in accordance with DIN 45596, 48 volt phantom powering to one or two CU-31 or CU-32 microphones. It has been specially designed to keep ripple voltage under 50 micro volts. It contains a power ...

In-line standard XLR lightweight aluminum barrel adapter supports older condenser microphones requiring 12V A/B T-powering for operation, acting as a converter and allowing use with mixers, microphone preamps, or cameras supplying 48V ...

Phantom power adaptor with mini-XLR 4-pin input.Phantom power adaptor for Opus/MCE .18 microphones with 4pin mini-XLR plug to connect to phantom-powered mic inputs.

 Power module only for AT898, AT899 microphones.

 Power module only for AT831R, U853R(W), U853R(W)U, U857R(L), U857R(L)U.

2 mic inputs48V phantom powerSignal to noise ratio: 117dBReverse phase buttonStacks easily with any other Neo Processor

For adapting any Galaxy headset or lapel mics to a standard XLR wired system, Phantom or Non-phantom. 3-pin TB3M Input Connector and Cannon 3-pin XLRM Output Connector. Operating Voltage: Phantom Power 9-52 V; Battery 1.5V(UM-3/AAx1) ...

Single channel ac powered 48 volt phantom power supply. Will operate with any microphone requiring from 12 volts to 48 volts  @ up to 10 ma. Very low noise and distortion. 3 year warranty.Specifications Frequency Response: ...

Dual channel ac powered 48 volt phantom power supply. Will operate with any microphone requiring from 12 volts to 48 volts @ up to 10 ma. Very low noise, distortion and crosstalk. 3 year  warranty.Specifications Channels: Two ...

XLR microphone adapter for the PCMD1. Ideal for portable recording applications. Two balanced XLR inputs and switchable 48V phantom power. It can be mounted onto the bottom of the PCM-D1 or PCM-D50 or on the side with mounting ...

Powers up to 6 condenser microphones with 48 volts of ultra clean phantom power. The outputs are 1/4" Tip-Ring-Sleeve balanced for easy connection to a digital multi-track recorder. To eliminate the possibility of any DC voltages, it ...