24-Volt North American universal power supply for Radio Design Labs equipment.Features: Single Output Short-circuit, overcurrent and overload protection EMC and Low Voltage Directive Compatibility Small Size High Reliability ...

List Price: $86.86
Our Price $65.01
You save 25%!
Usually ships in 1-2 business days

The ST-MX2 is used in any application requiring mixing of two audio sources. A mic may be mixed with a line level music source. Two mics may be mixed to feed the mic or line level input of a power amplifier. A mic or professional +4 dBu ...

List Price: $168.05
Our Price $117.26
You save 30%!
Usually ships in 1-2 business days

The ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving either high or low impedance, balanced or ...

List Price: $173.93
Our Price $121.37
You save 30%!
Usually ships in 1-2 business days

The STM-2 is a quality low-noise microphone preamplifier designed for use in commercial sound, broadcast, and recording. The STM-2 is very flexible, with gain adjustment from off to +65 dB, two balanced or unbalanced outputs, and available ...

List Price: $177.46
Our Price $123.83
You save 30%!
Usually ships in 1-2 weeks
Need it sooner? Call us!

The STM-DA3 is designed for use in quality commercial sound, broadcast and recording applications. The 1.2 kOhm balanced input accepts a wide variety of microphone input levels without loading professional low impedance microphones. A ...

List Price: $170.42
Our Price $118.90
You save 30%!
Usually ships in 1-2 weeks
Need it sooner? Call us!

The STA-2A is a dual-channel, line-level audio preamplifier. Each channel is identical. The audio inputs are bridged at 20 kW and accept either an unbalanced or a balanced audio signal. Gain is adjustable from unity gain to +24 dB using a ...

List Price: $192.74
Our Price $134.50
You save 30%!
Usually ships in 1-2 business days

The STM-3 is part of the group of "STICK-ON" products from Radio Design Labs. The STM-3 is a quality microphone preamplifier designed for use in commercial sound, broadcast, and recording applications. Its compact size makes it ideally ...

List Price: $204.49
Our Price $142.69
You save 30%!
Usually ships in 1-2 business days

The STA-1M allows bridging any audio line, adjusting the gain, and driving a balanced or unbalanced line. The circuit design allows the input to accept either balanced or unbalanced signals, of either high or low impedance. This is an ...

List Price: $133.98
Our Price $93.48
You save 30%!
Usually ships in 1-2 business days

The STA-1 is a dual-channel line amplifier with bridging inputs, adjustable gain or loss, and low impedance outputs. Each of the two identical circuits are both an electronic line transformer and a line amplifier. Hook up the STA-1 just ...

List Price: $182.16
Our Price $127.11
You save 30%!
Usually ships in 1-2 business days

24-Volt European universal power supply for Radio Design Labs equipment.Features: Single Output Short-circuit, overcurrent and overload protection EMC and Low Voltage Directive Compatibility Small Size High Reliability Test Standards ...

List Price: $83.44
Our Price $62.37
You save 25%!
Usually ships in 1-2 business days

Mic Preamp,Dist Amp Out No PS

List Price: $170.42
Sale Price $99.00
You save 42%!
Usually ships in 1-2 business days

The ST-MPA2 contains two identical phantom power circuits and a common power supply input. If only one mic input is to be converted for phantom operation, only one circuit needs to be used. Each circuit has a mic input and a mic output. ...

List Price: $112.81
Our Price $78.71
You save 30%!
Usually ships in 1-2 business days

The ST-MX3 is part of a group of products in the STICK-ON series from Radio Design Labs. The durable bottom adhesive permits quick, permanent mounting nearly anywhere, or use it with RDL's racking accessories. The ST-MX3 gives you the ...

List Price: $155.13
Our Price $108.25
You save 30%!
Usually ships in 1-2 business days

The RU-MLA2 is a dual channel audio preamplifier. The inputs and outputs may be connected through the front-panel XLR jacks or on the rear panel detachable terminal blocks. Each input accepts either a balanced microphone or line level ...

List Price: $327.08
Our Price $228.21
You save 30%!
Usually ships in 1-2 business days

Optional module for OctaMic D preamp. The ADC module adds 8 channels of pristine 192 kHz AD-conversion, available as double ADAT output (S/MUX, up to 96 kHz), and simultaneously via DB-25 connector as 4 AES outputs (up to 192 kHz). It ...

List Price: $449.00
Our Price $399.00
You save 11%!
Usually ships in 1-2 weeks
Need it sooner? Call us!

The RU-OSC4A is the ideal choice in many installations where either manual and/or automatic audio reference tones are required. Output connections are made on the rear panel through full-size, clearly identified, barrier block ...

List Price: $344.33
Our Price $240.27
You save 30%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

List Price: $379.00
Our Price $365.32
Usually ships in 2-3 weeks
Need it sooner? Call us!

Metered distribution amplifier, Dual 1x4, balanced outputs at +22dMb, LED bargraph for the System 10K module.

List Price: $495.00
Our Price $477.13
Usually ships in 2-3 weeks
Need it sooner? Call us!

Metered distribution amplifier module. 1 input to 6 independent outputs at +22dBm. LED bargraph meter for the System 10K module.

List Price: $679.00
Our Price $654.50
Usually ships in 2-3 weeks
Need it sooner? Call us!

Metered Dual Line Amplifier, outputs at +24dBm for the System 10K module.

List Price: $469.00
Our Price $452.07
Usually ships in 2-3 weeks
Need it sooner? Call us!