Microphone clips/mounts for lapel/lavalier

The TC-200V is a vertical tie clip for Telex WLM-200 and WLM-50 lavalier microphones.

The viper grip clip has two pins on the back to slide securely into cloth at any angle. The clip is designed to hold the microphone a fraction of an inch away from the back plate.Turning the active side of the capsule into the surface of ...

Replacement beltclip 

Pack of 30 Stickies. Double-sided adhesive pads used for mounting lavalier microphones to clothing or skin.

The auditorium hanger consists of a cable suspension and a rotating 1/2" threaded stud, to connect to e. g. swivel mounts. The stud is screwed into the threaded coupling of the swivel mount. Then the microphone can be tilted while it is ...

DPA CC 4099, Cello microphone holder for DPA 4099 Cello microphone, black 

Tie Clip  

The DMM0016 is a small holder with minimal visual appearance when mounting a DPA 4080 Miniature Cardioid Microphone on a speaker. When mounting on thin fabric, the DMM0016 offers safe and stable use of 4080.The Magnet Mount is supplied ...

The DMM0015 is a flexible clip for mounting two DPA 4080 Miniature Cardioid Microphones on a speaker offering optimum safety in terms of backup if one of the wireless channels should fail to function.The 4080's rubber shock mount can ...

Clothing clip base, single microphone holder and double microphone holder for AT898 and AT899 models (black). Fits Audio-Technica Case Style(s): M29, M30

Fits Audio-Technica Case Style: M31

The viper grip clip has two pins on the back to slide securely into cloth at any angle. The clip is designed to hold the microphone a fraction of an inch away from the back plate.The viper grip is a good choice for discrete placement on ...

The viper grip clip has two pins on the back to slide securely into cloth at any angle. The clip is designed to hold the microphone a fraction of an inch away from the back plate.Turning the active side of the capsule into the surface of ...

Detachable power supply with Lectrosonics TB5M connector. The TR79 power supply provides a balanced transformer output to an XLR connector and uses an Eveready 357 battery. The battery compartment is designed to permit only one insertion ...

Horizontal single tie clip for the ECM55 microphone.

 Tie Clip for the SM11 Microphone.

Accessory kit for MKE2 consisting of MZQ222-NI, MZQ222, MZW2-A, MZW2-G, ZH100-ANT, ZH100-BEI and case.

 The DMM0001 is a flexible clip for mounting up to two Miniature Microphones or the Compact Microphone Type 4036 on the chest of a speaker. The length of the clip ensures a stabile mounting even on thin clothes and the rubber piece ...

MIPRO's 7AF007 is a mic clip for their MU55L lavalier mic.

Holder for miniature microphones. The DMM0017 creates distance to the capsule to minimize clothes- and fabric noise and it is prepared for both left and right mounting.It is used with omnidirectional microphones that pick up the sound ...