Microphone Desk/Short Stands

The MZTX31 microphone table stand includes an XLR connection so you can operate MZH Series goosenecks. The XLR-3F socket is for the gooseneck, and the XLR-3M socket is for connecting a microphone cable. It is designed for the MZH-3015, ...

The low-profile AT8666 microphone desk stand allows gooseneck microphones to be quickly mounted in applications not suited for permanent installation. The sturdy metal base is equipped with a 3-pin XLRF-type in, and an XLRM-type output ...

The low-profile AT8666RSP quick-mount desk stand base with user-programmable switch offers three settings: press on/press off, momentary on, and momentary off. The sturdy metal base is equipped with a 3-pin XLRF-type in, and an XLRM-type ...

On-Stage Stands' DS7200QRB features a Quik-Release trigger clutch for fast, two-handed operation.  Its solid sand-cast base with 5 rubber feet adds stability.Specifications: Height: 9.5"-16" Base Diameter: 6" Base Weight: 2 lbs

Heavy duty, shock absorbent table stand for ADX112 and ADX118.For ultimate flexibility and portability, the optional ATS10 heavy duty table stand is ideal. Since the electronics for the ADX112/118 are built into the base of the microphone, ...

The S37A desk stand features a low-profile design for use with various Shure swivel adapters and shock mounts, and has a non-reflective, textured, gray finish.

Combination floor and table stand. Heavy black cast-iron base with sound absorbing rubber insert. Height-adjustable 2-piece tubing. Base diameter: 0.59 inches (180mm) Height: from 1.16 to 1.90 inches (355 to 580mm) Height adjustment: ...

When it comes to miking seated speakers, you need the right tool for the job. The Table-top Mic Stand/Gooseneck fits the bill perfectly, boasting a solid base for stability and an adjustable height of up to 14.2". The powder-coated finish ...

REPACK/BOX OPENDesktop base for MX405 and MX410 models.

Compatible with 5/8"-27 threaded stand clamps.

Beautifully designed, compact, zinc die-cast base. 3-pin XLR connections (male/female), completely mounted, crackle-free switching, with phantom powering-pilot light, with switch (gray). Two diodes indicate the operating state (voltage / ...

This variable microphone clamp has everything you need. A sophisticated mechanism allows the clamp to be rotated 360 degrees. At the same time the height and position can be varied as required. A supplementary extension tube can be used ...

Heavy-duty table stand. 6.7" Diameter x 3.7" Height.

Features/Specifications: 4.72" x 4.9" x 1.57" 2.65 lbs. (1.2 kg) Zinc die-cast Accepts XLR Gooseneck Mic XLR Output

Features/Specifications: Push to talk/push to mute switch & LED indicator Accepts XLR Gooseneck 4.72" x 4.9" x 1.57" XLR Output 2.65 lbs. (1.2g) Zinc Die-Cast On/Off SwitchNOTE: Exact model NOT shown in picture above.

 Miniature stand for small mics. 74 mm = (2.9" diameter) Net/Shipping weight: 315/350 g (11.1/12.3 oz.), color: gray.

Collapsible mini tripod stand for the Rode VideoMic, 1/4" thread.

MF 4Floor stand with grey cast iron base. The floor stand has a matt black finish and rests on a non-skid rubber disk attached to the bottom. A reversible stud and a reducer for 1/2" and 3/8" threads are also supplied. Weight 2.6 kg, ...

This quick-mount plug-in desk stand features a user-programmable switch and an external contact closure. The sturdy metal base is equipped with a 3-pin XLRF-type in, and a 5-pin XLRM-type output connector. It is designed to fit any ...

Swivel mount for active capsules of the KM 100 system. A rubber shock mount suppresses structure-borne noise. The swivel mount has an M 6 thread (6 mm). Attaching the swivel mount to the MF 2 table stand, the SGE 100 replaces the rubber ...