Microphone Clamps for Tables, Stands, Instruments

The isolation cylinders on this clip dampens unwanted vibrations while miking your drum.

On-Stage Stands' TM01 can be mounted horizontally or vertically, on round or flat surfaces. The C-clamp mounting bracket securely attaches to microphone stands, cymbal stands, boom arms, and tables. Fits industry standard 5/8" ...

This shock-proof clip securely attaches to a drum rim and works with any 5/8" - 27 mic clip.

On-Stage Stands' TM03 C-shaped mounting clamp sits virtually flush with your desktop. Nylon tipped screw firmly grips tabletops between 0.625"-1.625". Gross Weight: 0.53 lbs

Shure's innovative A56D Microphone Drum Mount sets a new standard for versatility. Compact in design, the A56D can be used in a multitude of positions for accurate microphone placement. Live, or in the studio, this universal clamp can be ...

Gooseneck clip designed primarily for use on drums. Works with D series, Micro D series, and most other mics. Will work with all other mic clips using a 5/8" thread. Included with all D series drum packs.

Spring clamp type clip fits a wide variety of mics. Adjustable angle; brass insert with 5/8-27 threads.

"C" type, multi-position clamp, fits 1.25" diameter tube or flat surface. Male 5/8" - 27 thread. The thread insert rotates 90 degrees in three positions. Soft rubber insert prevents scratching.

The D-FLEX is a gooseneck drum attachment for mounting Audix D-series instrument & drum microphones to drums or amplifiers. The flexibility of its design allows for a variety of mounting positions and angles (dual pivot ...

Drum Mic Clip with adjustable height and strain relief. Provides isolation from shock and vibration. Designed for use on all snare and tom drums, the DMC1 easily attaches to most rims.

Newly improved L-shaped drum clamp, fits e604 and e904 microphones.

An innovative micing solution for guitar amps and cabinets Allows for precise positioning Simple, elegant, compact and easy to use No tools required Adjustable, tension held Mic arm hand tightens firmly into position Holds ...

Patented, multi-use adapter/clamp secures microphones, horizontal booms, or accessories with standard 5/8"–27 threads. Versatile unit also clamp mounts to 5/8" and 7/8" diameter tubing or to free-standing instruments, keyboards, ...

Fully adjustable to any angle, holds microphones or boom arms with 3/8" threaded bolt. Attaches to round or flat surfaces.Clamp adjustable to 60 mm. Weight: 1.1 lbs (0.5 kg) Length: 11.81" (300 mm)

Mic adaptor that attaches to stands with a diameter up to 23 mm. 3/8" threaded bolt for attaching goosenecks and mic clips. A 3/8" to male 5/8" adapter is included so that a standard 5/8" mic clip can also be mounted.

Flexible mini-gooseneck for rim mounting the Micro-D and Micros - fits most drums.

3/8" threaded bolt. For goosenecks, etc. Clamp adjustable to 1.77"mm. Weight: 7 oz.

Low-profile isolation mount (can be installed above or beneath mounting surface).Fits Audio-Technica case styles: M26, M27, M34, M35.

Allows for easy clip on microphone rim mounting for most drum and percussion instrumentsAdjustable height and swivel3 clips per set

This unit is a rim clip shockmount, for use with the Apex165 miniature instrument condenser microphone.Note: Microphone and cable in image are for illustrative purposes only - not included.