Microphone Accessories

Adapter for use with DPA's series of Miniature Microphones. Compatible with Line 6 XD-V70L, Shure PGX1/SC1/SLX1/ U1/ULX1/UR1/UR1M/UT1, TOA WM4300MicroDot to TA4F Switchcraft.

Ultra-slim body and designed for on-the-go recording needs. Perfect for multi-track recording, it features built-in headphone monitoring with zero latency, 20-20kHz frequency response, peak signal LED indicator, and monitor mix control for ...

XLR Female to XLR Male with On/Off Switch.

Female mini jack 1/8" to male XLR adapter for connecting the Rode VideoMic directly to cameras with XLR input.

Adapter for powering Miniature Microphones via standard P48.This adapter is similar to the DAD6001, but is also fitted with a belt clip.The DAD6001 is passive and designed for usage Miniature Microphones from DPA only.

Adapter for use with DPA's series of Miniature Microphones. Sennheiser SK 50/SK 250/SK 2000/SK 3063/SK 5012, Trantec SD7000 Digital Wireless, Shure UR1MLemo3, Wisycom MTP30MicroDot to 3-pin Lemo (Sennheiser).

The Shure A15RF In-Line RF Attenuator provides all types of balanced audio sys-tems with greatly improved immunity to radio frequency interference (RFI). It is especially useful in applications where balanced audio devices near strong RFI ...

Microphone assembly with connector, WM-4310. (Replacement.)

The A120S Accessory in-Line Switch can be used to add an On/OFF, Push-To-Talk, Cough Button, or Transmitter-Relay Keying function to a microphone or other device rated at up to 3 amps ac (0.5 Adc) 125V, non-inductive load. The switch has ...

Element covers for AT892-TH models (3-pack) (beige). Fits Audio-Technica Case Style(s): M31

This unit has a balanced bridging input with 100 kilohm input impedance and 50 dB loss. Use the A15LA to connect high-level line or Aux Outputs to low-impedance microphone inputs. It will attenuate the output from such devices as mixers, ...

Adapter for use with DPA's series of Miniature MicrophonesMicroDot to TA-5F Switchcraft.For high sound pressure level use (-20 dB attenuation).For normal sound level (0 dB attenuation) we recommend DAD6021.

Active directional paddle antennas (2) with gain switch and mic stand mount for use with the XD-V70 digital wireless microphone systems.

The MS111 is a general purpose muting switch for microphones and will pass phantom power. It is configurable to be Push to Mute, Release to Mute, Push ON and Push OFF maintained contact. It is the only switch of this kind we know of and is ...

Just Plug the KickPad™ into the mic line feeding your favorite cardioid kick drum mic and you will experience an incredible “instant kick drum sound” that is exactly repeatable, every time. The KickPad™ can also be ...

Black boom holder and logo pad for Beta 53, WBH53, Beta 54, WBH54. Contains two of each.

Momentary foot switch that allows operator to temporarily mute microphone. Selection switch for dynamic or condenser microphone.Short Stop represents a name change for the original Pro Co Cough Drop, a passive momentary ...

The Reflexion Filter is a portable device for recording live sound sources with reduced room ambience. It is an advanced composite wall which is positioned behind any microphone by means of a variable position stand clamp assembly which ...

1/2? calibrator adapter for all M Series measurement microphones

The Whirlwind Micmute boxes offer passive switching solutions for controlling the on and off conditions of a microphone or balanced line signal via footswitch or finger switch operation. There are three styles, which cover all the ...