Lighting Stands, Mounts, Gaffing

Mount your Mini-cool and umbrella to your light stand. Fits a standardprofessional light stand with a 5/8" pin. Accepts standard diameterumbrellas of all sizes.

This bracket mounts on top of the Umbrella Mount, allowing you to bounce two lights into anumbrella to double your light intensity. This Double Pin Bracket is also ideal for a standardlight stand where the extra firepower of two Mini-Cools ...

The Ultraclamp is a small yet rugged mounting device. This valuablelittle accessory can be mounted anywhere from a two-inch pipe to a carwindow. Included with a 5/8" post for a light or can be attached to the  Ball Swivel Head for ...

This adapter is required for attaching the Mini-cool to any of the five itemslisted below, all of which have 5/8" diameter posts:• MD5100 Putty Knife• MD5150 "T" Bar Clamp Mount• MD5500 Collapsible Light Stand• MD5250 ...

Designed specifically for clamping to the "T" bar of a suspended ceiling,so that the Mini-cool may be suspended. Has a 5/8" mounting post andaccepts Mini-cool Stand Adapter.

Solves many different light mounting problems. Blade will fit in cracks, between doorsand frame, between window and frame, between books or beneath any heavy object, or blade may be taped to a wal or other surface with duct tape. Has 5/8" ...

For attaching the Mini-cool to pipes, shelves, doors, etc. Clamps objects up to2 inches thick. Soft vinyl tips protect surface being clamped. Has 5/8" post whichmates with Mini-cool Stand Adapter (MD5050).

Screw-in Stud (2)Code: LSSWeight: 4 oz (113 g)Standard 5/8" (16 mm) mounting stud with safety undercut. Screws into wooden surfaces such as the top of studio sets to support small lights, flags, reflectors, etc. (Set of 2).

KS StandCode: KSMax. Height: 9' (2.74 m)Folded Length: 36" (91 cm)Max. Base Diameter: 3'5" (1 m)Min. Tube Diameter / Max. Tube Diameter: 7/8" (2.2 cm) / 1 1/8" (2.9 cm)Weight: 4 lbs (1.8 kg)Legs/Number of Risers: Double-strut leg brace, ...

Lowel Anchors (4)Code: LAWeight: 12 oz (340 g)Ground spikes fit through leg holes in KS, KSA and Grand Stands to anchor on grass, sand etc. (Set of 4)

Grip Code: KGWeight: 2 oz (340 g)This versatile heavy-duty clamp attaches to stands, poles, pipes, 2" x 4"s etc. to support lights with Interlink, or Double Male Stud; makes a boom out of Stand and Pole; works with Space Clamp, Maxa-mount, ...

Full PoleCode: KPMax. Height: 6.6' (2 m)Folded Length: 34" (89 cm)Min. Tube Diameter / Max. Tube Diameter: 7/8" (2.2 cm) / 1 1/8" (2.9 cm)Weight: 1.75 lbs (.8 kg)Legs/Number of Risers: 2 Risers (3 sections). Recommended Uses & Notes: ...

Supplied in pairs, floor trunnions are attached to portable borderlights and cyclights that are to be mounted on the floor. Altman FT trunnions have two fixture mounting holes to allow for flexibility. Double trunnions allow for mounting ...

Lobo (2)Code: F1-30Weight: 10 oz (284 g)Positions Maxa-mount, Lobo Arm, frame-ups, flags, umbrellas, etc. Attaches to the top or shaft of stands, to the Space Clamp bar, to any 5/8" (1.59 cm) stud or to pipes up to 1 1/4" (3.2 cm) ...

Lobo ArmCode: F1-40Weight: 3 oz (85 g)Size: 22" (55.9 cm) shaftWith 5/8" (1.59 cm) stud. Used with Lobo or Grip; extends, articulates and booms small lights, reflectors, etc.

KS Jr. StandCode: DT-33Max. Height: 7'7" (2.3 m)Folded Length: 28" (65 cm)Max. Base Diameter: 3'1" (99 cm)Min. Tube Diameter / Max. Tube Diameter: 3/4" (1.9 cm) / 1 1/8" (2.9 cm)Weight: 3.5 lbs (1.6 kg)Legs/Number of Risers: Single-strut ...

Lobo & Maxa-mountCode: CM-11Weight: 17 oz (382 g) Maxa-mountCode: CM-10Weight: 7 oz (198 g)Size: 27.75" (70.5 cm) long; 3/8" (1 cm) shaft Supports (with Gaffer-tape or double-faced tape) light reflecting or control panels, props and ...

DP FrameCode: D2-24Weight: 8 oz (227 g) Size: For 12" x 16" (30.5 x 40.6 cm) gelsLocks directly into the DP or Lobo. Pans and tilts with the light. Permanent gel clips and adjustable support arm.

Scissor-mount (2)Code: CM-20Weight: 9 oz (250 g)Attaches small lights and accessories to grid of dropped-ceilings in offices and other areas. Use Gridlock (CM-21) with Pro-light. (Set of 2).

Big-footTMCode: CM-30Size: 7" X 10" X 1/4" Weight: 11 oz (311 g)Plate only without scissor-mount.