Intercom, Hard Wired, Stations and Interfaces

The KB-702 remote speaker station permits the user to select between two channels of party-line communications, with the ability to talk and/or listen on the selected channel. The user can listen via the integral speaker, or may use a ...

The KB-701 remote speaker station connects to a single channel of party-line intercom, and operates in half-duplex mode, similar to a walkie-talkie. It features both an integral speaker and a flushmount electret microphone with mic limiter ...

The ICW6 is a window mountable intercom system (no microphone). It features excellent sound quality and a locking connector for the power cable. Requires headset and microphone for operation (sold separately).Specifications:General Power ...

 Features a user programmable microprocessor assisted interface for the highest degree of flexibility and versatility. It is capable of two or four wire operation depending on configuration. Unique modular design supports five ...

The HB-702 is a two-channel-selectable, full-duplex headset station, able to be mounted into a wall or other surface. These head-set stations are ideal for installation in theatrical, performance, broadcast, and industrial facilities - ...

The Quam CIS4/25 is a complete vandal-resistant call-in station with integral speaker/microphone and momentary, normally open, push-to-call button. The faceplate is 12 gage, brushed stainless steel with tamper-resistant, #6-32 'pin-in-hex' ...

The Model 210 Announcer's Console is an audio control "hub" for announcers, commentators, and production personnel. Compatible with essentially all broadcast and production audio system environments, the tabletop unit is often used for ...

The Model 32A Talent Amplifier is a self-contained listen-only belt pack unit intended for use by on-air talent or production personnel. It is directly compatible with the Studio Technologies Model 2 Central Controller as well as other ...

The Quam CIS2/25 is a complete vandal-resistant call-in station with integral speaker/microphone and momentary, normally open, push-to-call button. The faceplate is 12 gage, brushed stainless steel with tamper-resistant, #6-32 'pin-in-hex' ...

The MS-2002 is a complete 2-channel master station and system power supply in a single unit. You simply plug it into any AC power outlet from 100 to 240 volts, add a microphone or headset, connect intercom stations to the back panel and ...

 Features a user programmable microprocessor assisted interface for the highest degree of flexibility and versatility. It is capable of two or four wire operation depending on configuration. Unique modular design supports five ...

Production Intercom's Blazon/3 is triggered by the same voltage which lights the normal signal lamps in the intercom system.  Whenever any signal lamp button on any station in the same circuit is pressed, the Blazon/3 will be ...

The MS-702 is a one-rack-space, two-channel main station with a regulated 1.2-amp "fail-safe" power supply, individual channel short-circuit protection, and a versatile intercom monitoring system. It supports two intercom channels with up ...

The 704 series is Clear-Com's most advanced party-line intercom system. Each station is a four-channel intercom with superior audio and versatile channel access to provide unmatched communication flexibility. All front-panel controls are ...

2-channel/3-pin XLR cable adapter. Combines two intercom channels on a single 3-pin cable for stations with the TW option.All TW beltpacks require a Clear-Com TWC-701 or TWC-704 circuit for two-channel operation. The adapter allows the ...

The US-2002 is a simple, multichannel user station. It provides you with talk, listen, and call capabilities. You simply plug it into any AC power outlet from 100 - 240 vlots, add a microphone or headset, connect intercom stations to the ...

 Can be combined with MCE-325 and MRT-327 to provide speaker station operation. All speaker driver and control circuitry is contained in MCE-235 and the MRT327. Part of RTS's unique modular packaging system in 1/2 rack by 1 RU metal ...

You can interface Anchor ProLink wireless with the wired systems including PortaCom and other 2-wire party line unbalanced systems using WM-9000. (When using Anchor ProLink with a wired PortaCom system, substitute the WingMAN for the ...

The model SSA-324 is a system-to-system adapter (or interface). The SSA-324 is ideal for systems with steady loads. (Amount of user stations are steady like in fixed installations.) It interconnects the voice signals between different ...

2-channel select portable speaker user station. Can be used as a "public" listen box via built in speaker or privately through theheadset connection. Features channel select switch, call light, speaker on/off switch and dual-purpose ...