Intercom, Hard Wired, Stations and Interfaces

While the Model 2 Central Controller can be used completely "stand-alone," the Model 22 Access Station can be used to provide additional IFB origination locations. Model 22s are installed at positions convenient to producers, directors, or ...

VPVT-PB Series vandal proof loudspeaker station withstand damage caused from abuse, moisture, corrosion, dust, vibration and temperature extremes from 150° to -30°F. Station is available in 15 watt model with 12 gauge stainless ...

Available in flush, semi-recessed, and surface-mounting configurations Environment-resistant paging and intercom stations for outdoor installation include weatherproof call/signal origination switch Loudspeaker provides clear and ...

The WM1000 intercom stations are designed for stationary, wall-mounted installation in standard two-gang electrical boxes. The WM-1000 is a single-channel station. The WM-1000 is ideal when users need to access the intercom system from ...

 Twelve-channel “intercom control center”, with individual talk and listen buttons, and level control for each channel. With extensive microprocessor-based, menu-driven programming capabilities, set up the four ...

• Cost-effective communication for 25 to 75 rooms• Color-coded guidelines for easy operation• Instant EMERGENCY and ALL ROOMS announcements• Remote emergency paging capabilities• 20-watt intercom; separate 35-watt ...

Twelve-channel "intercom control center", with individual talk and listen buttons, and level control for each channel. With extensive microprocessor-based, menu-driven programming capabilities, set up the four "preset" buttons for ...

Dual channel wallmount station, 4 pin XLR-M headset connection.

The RTS™ Model 803 Master Intercom Station is an updated replacement to the popular Model 802. By employing many of the technological breakthroughs that have occurred since the design of the 802, RTS™ has been able to integrate ...

Central IFB electronics station. Contains all necessary control functions and electronics including line power, to provide the active link between the 4001, 4002 and 4003 control stations and the 4030 and IFB-325 user ...

The Model 33 Talent Amplifier is a self-contained belt pack unit that drives talent earpieces or headsets. A single 3-conductor microphone-type cable links the Model 2 with the talent amplifier. Each unit contains both a male and ...

The master control access station provides individual access to four talent channels, and "ALL IFB" access to all the IFB channels in the system. It contains the audio line-driver circuits. One MA-704 is required at each talent access ...

The RCS -2700 source-assignment panel is the first system available to offer remote-controlled switching of party-line assignments for medium to large size systems. The main switching unit is the RCS-2700, an 8-source by 24-destination ...

The DSI-2008 dual digital hybrid interfaces two two-wire intercom lines to two four-wire lines, and also interfaces balanced and unbalanced two-wire lines. It is perfect for systems with varying loads.Unlike analog hybrids, the DSI-2008 ...

Production Intercom's MSM-2 is an add-on (and NOT a stand-alone) module to the MS-200.  The MSM-2 adds two more circuits (C & D).Connection to the MS-200 is made via a 9-pin D-sub connector on the rear panel.  The MSM-2 ...

Production Intercom's HS-2R/L is a combination of their HS-1 headset station and the xenon (strobe) light elements from their Blazon series.  Like all HS versions, the HS-2R/L provides the same facilities as Production ...

The RM-702 is one of a series of professional remote intercom stations. The remote speaker/headset station allows two-channel selectable talk and listen in one rack space. The operator can talk and listen on either channel separately or ...

• Cost-effective communication with 25 staff stations• Color-coded for easy operation• Instant EMERGENCY/ALL-ROOMS announcements• Remote emergency paging capabilities• 20-watt intercom for instant two-way ...

The TW-47 is a stand-alone interface designed to connect a 2-way radio or walkie-talkie into a single channel of a standard Clear-Com, RTS* (*for RTS systems equipped with the Call Light feature), or compatible 2-wire party-line intercom ...