Intercom, Hard Wired, Power Supplies

 A small, economical, lightweight power supply designed for powering small systems. Housed in a rugged, all metal case, it features short-circuit protection with automatic recovery and full voltage regulation to 400mA. Three output ...

 Provides two independent output channels, one powered at 32VDC up to 1 amp and one "dry" and program audio. Features unique circuitry that protect outputs from short circuit conditions with automatic and instantaneous recovery when ...

The PS2001 power supply supplies two isolated channels of intercom system phantom power to down line components. Intercom power channels may be combined via the Combine/Isolate switch to form a single intercom power channel with double the ...

The PS-20 is a two-wire intercom power supply. The PS-20 features two- and four-channel operation, RTS® monitoring, two-channel program input, audio linking, and three-mode operation: RTS 2-channel, RTS 4-channel and ...

The SPS2001 has all of the features of the PS2001 but adds the power of a built-in speaker and level control for monitoring intercom lines. The SPS2001 may be used as a stand-alone power supply and monitor box or in combination with a ...

VHF beltpack battery pack that includes 6 nickel metal hydride batteries and sled for the TR200/300.

Flush mount 1 channel power supply, fits two gang electrical outlet box. The power supply, whether it be a discrete component or integrated into a master station provides system power for down-line components such as beltpacks and speaker ...

4 channel, 2 amp power supply. The power supply, whether it be a discrete component or integrated into a master station provides system power for down-line components such as beltpacks and speaker stations. All Audiocom® power supplies ...

RTS' SAP-1626 Source Assignment Panel provides a convenient means of assigning any one of 12 intercom channels and/or three program audio channels to 26 individual or groups of intercom user stations.  Viewed as a "matrix switch", it ...

PortaCom is a flexible, high-performance wired intercom system that is built smart and simple. PortaCom gives you two channels without sacrificing power or quality. It is expandable, portable or rack mountable. Best of all, PortaCom is ...

The PS-702 can supply up to 2 amps at 30 volts DC to two channels in a 1-RU. This is sufficient to power up to 40 beltpacks, 10 speaker stations, or 12 headset stations even under the most demanding conditions. Either channel is capable of ...

VHF base station 120V/12VAC power supply for the RE-2, FMR-70, ST-300, FMR-500, AAT-2, TC-2TX, and BTR-200/300 series wireless.

Repack/Box OpenThe PS-704 is a four-channel, single-rack-space intercom power supply that features Clear-Com's "fail-safe" design for maximum reliability. The power supply delivers 2 amps at 30 volts, supplying power for one to four ...

Repack/Box Open Provides two independent output channels, one powered at 32VDC up to 1 amp and one "dry" and program audio. Features unique circuitry that protect outputs from short circuit conditions with automatic and instantaneous ...

Production Intercom's PS-3 provides the facilities necessary to power your cabled intercom system from batteries.  Typically, a pair of 12V batteries are wired in series to provide 24V, then connected to the PS-3.  Best because ...

Two-Channel rack-mountable power console with four outputs for the portacom 2000 intercom system.The PC-2000 Power Console can power up to 20 BP-2000 Belt Packs over a combined total of 2,500 feet of cable. It has a power switch, an input ...

Production Intercom's PS-2 is highly regulated 24VDC, 2 Amp (continuous) power supply capable of supplying up to 66 BP-1 Belt Packs with all signal lights lit.  It can be rack-mounted or used as a table-top unit.The PS-2 features ...

4 channel, 2 amp power supply. The power supply, whether it be a discrete component or integrated into a master station provides system power for down-line components such as beltpacks and speaker stations. All Audiocom® power supplies ...

The PS-704 is a four-channel, single-rack-space intercom power supply that features Clear-Com's "fail-safe" design for maximum reliability. The power supply delivers 2 amps at 30 volts, supplying power for one to four channels of intercom. ...

Wall pack transformer for US/ES/WM/SS user stations. (The PS-L will not power station equipment downline.)