Intercom Antennas, Splitters, Accesories

The Clear-Com AN685 is a flexible antenna for use with their WTR670 and WTR680 beltpacks.NOTE: The color code is painted on the end of the antenna's screw threads.

Clear-Com's FreeSpeak II is a high performance wireless solution operating in the 1.9 and 2.4GHz frequency bands designed for extensive communication in large-scale operations.The FSII-TCVR-19 is an active transceiver antenna for the ...

Note: Product shown in image is for illustrative purposes only. May not be representative of actual product.DX Series HeadsetMD-XLR4M: Adapter cable for using XLR4F terminated dynamic headset with BP200 Beltpac, BP300 Beltpac, and WS200 ...

5.9” Reverse TNC base antenna

The HME G27009-1 is a 6 ft cable with right angle bracket for remoting base antenna (antenna not included ).

The Clear-Com FreeSpeak II is a high performance wireless solution operating in the 1.9 and 2.4GHz frequency bands designed for extensive communication in large-scale operations.The Clear-Com FSII-TCVR-24 is an active transceiver antenna ...

The Lectrosonics A500RA23 is a UHF antenna with a right angle BNC connector for use with Lectrosonics Wireless products using the Block 23 operating frequencies, which covers 588.80 - 607.900 MHz and 614.100 - 614.300 MHz.

DX Antenna Splitter/Combiner - 2-Way Antenna Splitter/Combiner.

The RAK850 Remote Antenna Kit allows you to relocate antennas away from the PRO850 base station for areas that experience RF reflection and dropouts.At times your professional audio equipment has to be located in areas that experience RF ...

Note: Product shown in image is for illustrative purposes only. May not be representative of actual product.DX Series HeadsetMD-XLR4F Adapter: Adapter Cable for using XLR4M terminated dynamic headset with BP200 Beltpac, BP300 Beltpac, and ...

Travel Case for DX300 Systems. Includes foam inserts.

RMK200 Mounting Kit: 1RU Mounting Panel for base antennas, includes two 2' cables

This coaxial design is approximately 48 inches in overall length, with an right angle BNC connector. The other end is cut to a 1/4 wavelength of the corresponding frequency block with a color band and tag specifying its block. It is ...

Note: Product shown in image is for illustrative purposes only. May not be representative of actual product.MD-XLR5F Adapter: Adapter Cable for using XLR5M termiated dynamic headset with BP200 Beltpac, BP300 Beltpac, and WS200 Speaker ...

DX300ES CAT-5 Cable Base Station Interconnect Cable - 7' with RJ45 connectors

The HME 172G658 is a battery door for their BP850 Beltpac.

The HME 115G342 is a Beltpac configuration cable.

The Lectrosonics A500RA21 is a UHF antenna with a right angle BNC connector for use with Lectrosonics Wireless products using the Block 21 operating frequencies, which covers 537.600 to 563.100 MHz.

CoachComm TMA-ANTSYS-09C Directional Antenna Kit Includes: 9 dBi directional antenna kit:(2) x 9 dBi directionalantennas (w/mounting brackets)(1) x L-bracket (w/ (2) x 5/8" (15.9 mm) dia.mounting posts)(2) x10 ft (4.5 m) coax ...

9 dBi Directional corner reflector antenna with N connector

RP-TNC to N coaxial low loss RF cable, 50 feet in length

PC-ANTCAB-20UF: RP-TNC to N coaxial low loss RF cable, 20 feet in length

The Neutrik NXPA-N-FF is a N Adapter female for remote TX antenna (cable not included). 

The Pliant Technologies PAN-CP24 is a 2.4GHz, 12 dBi Circularly Polarized (CP) Beam directional antenna protected by a durable ABS enclosure. It's equipped with a female N-Type connector and multi-threaded mounting block, and is designed ...