Floor Pockets, Stage Boxes, Table Top Boxes, Accessories

The Tilt 'N Plug Jr.™, model TNP121, is one member of a family of compact interconnect solutions designed for installation into a table in a presentation system. The TNP121 provides access to computer video, audio, network, telephone ...

NOTE: The FMCA1100 model is shown above in satin brass finish in lieu of an available photo of the FMCA1000 in satin black.Mystery Electronics' FMCA series combines easy installation, high capacity, and long-term value in a recessed floor ...

Atlas Sound FB4-XLRF floor box assembly provides a simple solution for recessed mic inputs. The unit is designed for easy installation into wood stages and platforms. (4) Female XLR connectors are recessed and slant loaded into the ...

Constructed of 11 gauge steel, the FP-1 permits flush installation for safe, reliable connections. Each unit incorporates a black carpet trim ring with a beveled edge.Two cable-clearance slots in the door allow it to close over cables when ...

Standard MP-100 Series Mini Pocket Panels are created from high strength aluminum alloy (6061-T6) that is .062" thick. Each standard panel is finished with electro-static applied, oven-cured black semi-gloss powder coat. Engraving the ...

Note: Image for illustrative purposes only.Unpunched come with integrated carrying handle and rubber feet. Entry hole is not pre-punched and strain relief is not included.These heavy-gauge, cold-rolled steel boxes feature a textured, ...

RapcoHorizon recessed floor input pockets are designed for permanent installations requiring multiple microphone, speaker, and/or video connections. Made from heavy duty steel, these are designed for durability and ease of use. This ...

Fits 8" X 8" X 4" surface-mounted electrical box. Image shows flush mount for illustration puposes only.These patent-pending wall frame assemblies with recessed panels provide greater protection for connectors while enhancing the ...

The UT240-278 is the next generation under table interconnect unit. It provides users with multiple connections to AV equipment. The UT240-1278 power socket is rated at 12 amp and can be used to power multiple laptops. The UT240-278 ...

NOTE: In lieu of an available picture of the FMCA2200-MYSTERY, a picture of the FMCA2400 is shown above.The FMCA Series 2000 is designed for applications where more inputs (up to eight) are required. It is thin enough to also be ...

Double Wide Stage Pocket with Textured Black Powder Coat Finish Stage Pocket Body and Black Powder Coat Finish Standard Lid. #124SLBK Stage Pocket has a 16 ga. (.060" thick) Steel Pocket Body and an 11 ga. (.120") Steel Lid and Mounting ...

Ace Backstage Co.'s Large-Sized Stage Pocket, the #122SLBK Full Stage Pocket is made of heavy duty steel. The flush Full Stage Pocket conceals audio, data, communications, electric, video, voice, AC power, and switches etc. below the floor ...

Constructed of 11 gauge steel, the FP-1 permits flush installation for safe, reliable connections. Each unit incorporates a black carpet trim ring with a beveled edge.Two cable-clearance slots in the door allow it to close over cables when ...

This is an insert plate, for use with the Horizon Mini Floor Box, containing 1 Speakon and 1 XLR female connector.

NOTE: In lieu of an available picture of the FMCA2000-MYSTERY, a picture of the FMCA2400 is shown above.The FMCA Series 2000 is designed for applications where more inputs (up to eight) are required. It is thin enough to also be ...

Mystery Electronics' Type J modular insert is punched for insertion & integration with an Extron AAP double space device.

Constructed of 11 gauge steel, the FP-2 permits flush installation for safe, reliable connections. It incorporates a black carpet trim ring with a beveled edge. Two cable-clearance slots in the door allow it to close over cables when ...

Insert plate with 15-pin HD female and 3.5mm female connectors. Includes a 6ft cable with male ends and covers 4 screwholes.

Repack/Box OpenThe FL-500P floor box combines rugged construction and an elegant design for use in carpet, tile or wood covered floors over poured concrete applications. This floor box has ample compartment room to accomodate power, audio, ...

The 102BBX Back Boxes are welded 14 gauge steel with a protective cover that is discarded when the pocket body is finally installed. The box and cover have a clear zinc corrosion resistant finish. A 1/2" mounting flange is predrilled to ...