Distribution Amplifiers, Video Digital

NOTE: Power supply not included.The HD5DA is a miniature, low cost, 1x4 HD-SDI distribution amplifier/repeater. Featuring four separately buffered HD-SDI outputs, the HD5DA provides automatic input cable equalization to 100 meters and ...

The VM-4Hxl is a distribution amplifier for HDMI signals with resolutions up to and including WUXGA and 1080p. The unit reclocks and equalizes the signal and distributes it to four identical outputs. Max. Data Rate - 2.25Gbps. Max. ...

The VM-2Hxl is a distribution amplifier for HDMI signals. The unit reclocks and equalizes the signal and distributes it to two identical outputs. Max. data rate - 2.25Gpbs HDTV compatible HDCP compliant HDMI support - HDMI (V.1.4 ...

Ideal for connecting the same signal to several devices at once. SDI distribution has an SD, HD and 3Gb/s auto switching input and provides 8 re-clocked outputs. It even handles ASI. It also supports ancillary data and embedded audio.

The VM-4HDCP is an HDCP compliant distribution amplifier for DVI-D signals with resolutions up to 1080p or UXGA. It reclocks and equalizes the signal and distributes it to four identical outputs. Max Data Rate - 1.65Gbps HDTV Compatible ...

 The VM-2HD is a high performance distribution amplifier for SDI (SMPTE 259M and SMPTE 344M) and HD-SDI (SMPTE 292M) signals. It will take one input, provide reclocking and equalization and distribute the signal to two identical ...

The Kramer VM-16H is a distribution amplifier for HDMI signals.  It reclocks and equalizes the signal and distributes it to 16 identical outputs. Max. Data Rate - 2.25 HDTV Compatible HDCP Compliant HDMI Support - HDMI (V.1.4 ...

Kramer's VS-4FW is a four port Firewire repeater / hub for any application where additional Firewire (IEEE 1394) ports are needed. Several hubs may be cascaded to create up to a 63 port Firewire system. It supports 100, 200, and 400 Mbps ...

NOTE: Power supply not included.The 3GDA is a miniature, low-cost 1x6 3G HD-SDI/HD-SDI/SDI re-clocking distribution amplifier. Featuring six separately buffered SDI outputs, the 3GDA provides automatic input detection, re-clocking and ...

NOTE: Power supply not included.The HD10DA is a miniature, low-cost 1x6 SD/HD (dual-rate) re-clocking distribution amplifier. Featuring six separately buffered HD-SDI outputs, the HD10DA provides automatic input cable re-clocking and ...

The Kramer VM-80V is a high performance distribution amplifier for composite or SDI signals. It can be configured as a 1:4 DA for s- Video (Y/C) signals and has controls to compensate for signal losses inherent in long cable runs.High ...

Kramer's VM-4HDXL is a high-performance distribution amplifier for SDI (SMPTE 259M, SMPTE 424M) or HD-SDI (SMPTE 292M) signals.  This unit takes one input, provides reclocking and equalization and distributes the signal to four ...

As a broadcast engineer or A/V professional, you likely have diverse needs when it comes to managing SDI signals within your environment - for monitoring, distributing, switching, multiplexing, and processing 3D in real time.  Until ...

When needing to send the same signal to several devices at once, OpenGear Converter SDI Distribution handles the task perfectly. Supports SD-SDI, HD-SDI, 2K and 3Gb/s SDI video formats. OpenGear Converter SDI Distribution also handles ASI. ...

NOTE: Power supply not included.The D5DA is a multi-format, 1x4 reclocking SDI Distribution Amplifier. The D5DA can be used as a low cost SDI DA or repeater. The SDI input is re-clocked and equalized to 300 meters of cable. In addition, ...

DVI-D Distribution Amplifiers provide multiple outputs from a single DVI input for distribution to devices capable of receiving and/or displaying such signals. The 1T-DA-552 provides 2x DVI outputs and is compliant with HDMI v1.3 ...

1T-DA-554 DVI-D Distribution Amplifier provides multiple outputs from a single DVI input for distribution to devices capable of receiving and/or displaying such signals. The 1T-DA-554 provides 4x DVI outputs. It is compliant with HDMI ...

The DA103-302 HDMI DittoAmp™ 1 x 2 distribution amplifier with built-in input cable (also known as a "splitter") distributes a single HDMI signal into two identical outputs simultaneously.  The built-in input cable helps to ...

The 1T-DA-652 HDMI Distribution Amplifier provides 2 outputs from a single HDMI input for distribution to devices capable of receiving and/or displaying HDMI signals. The 1T-DA-652 is compatible with HDMI v1.3 specifications and provides a ...

The 1:4 3G-SDI Distribution Amplifier allows a single SDI, HD-SDI or 3G-SDI video source to be distributed to as many as four Hi-Def SDI/HD-SDI/3G-SDI devices at the same time without loss of signal.  Crisp, highly defined visuals are ...