Distribution Amplifiers, Video Analog Line Level

The Kramer VM-50YC is a high performance distribution amplifier for s-Video (Y/C) signals. It takes one input, provides correct buffering and isolation, and distributes the signal to 5 identical outputs.Bandwidth (Y) - 285MHz (- 3dB). ...

The KRAMER VM-5ARII is an ultra-high bandwidth, Video/Audio Distribution Amplifier designed for studio and other demanding applications. The VM-5ARII splits a single input source into five identical outputs with no discernible signal ...

Standard 19" rack-mount distributors for composite video with BNC connectors and loop-throughs, some have audio distribution, all have built-in AC power supplies.

The VM-54 is a high performance dual-mode distribution amplifier for composite, SDI, or component video signals. It can be configured as a 1:18 distribution amplifier for component (YUV) signals and provides controls to compensate for ...

The Kramer VM-1015 is a high performance distribution amplifier for composite or SDI video signals. It provides controls to compensate for signal losses inherent in long cable runs.High Bandwidth - 340MHz (- 3dB). Level (Gain) and EQ ...

The VM-1010 is high performance distribution amplifier for composite video. It can be configured as a 1:5 distribution amplifier for s-Video (Y/C) signals and has controls to compensate for signal losses inherent in long cable runsHigh ...

The VM-1021 is a high performance distribution amplifier for composite or SDI video signals. It provides controls to compensate for signal losses inherent in long cable runs.High Bandwidth - 350MHz (- 3dB).  Grouped Level (Gain) and ...

The Kramer VM-10AN is a high performance distribution amplifier for composite video and unbalanced stereo audio signals. It takes one input, provide correct buffering and isolation and distribute the signal to 10 identical ...

The FP-AVDA4 is the perfect choice in applications where consumer format audio and video signals need to be distributed simultaneously. Audio and video inputs and outputs are made on the top panel phono jacks. The FP-AVDA4 has a ...

URIP rackmount panels instantly simplify & save big on labor costs when installing a Studio A/V Router. The URIP Panels eliminate soldering & other hook-up hassles. Just plug in your cables and you're done. Both BNCs and XLRs are ...

The FP-SVDA4 is the ideal choice in many applications where component video signals need to be distributed. Video inputs and outputs are made on the top panel jacks. Power connections are made using either the full-size barrier block ...

The FP-VDA4 is the ideal choice in many applications where video signals need to be distributed. Video input and output connections are made on the top panel BNC jacks. Power connections are made using either the full-size barrier block ...

HBVB/VDA, 1x4 Humbucking Video Distribution AmplifierFrequency Response DC - 100 MHz @ -3dB (1 V pp input signal)Input Signal Level .05 - 2.0 V pp composite (within -1 volt to +1 volt range from ground)Input Common Mode Range -15V to +15V ...

The RM-50 holds 1-3 units.  The VDA-50 consists of two or three separate high performance video distribution amplifiers with user selectable jumpers on the PCB that allow it to be configured for various multiple or single video DA ...

The RU-VDA4 is part of the group of RACK-UP products from Radio Design Labs. RACK-UPs feature the advanced circuitry for which RDL products are known, combined with accessible user-friendly controls and displays. The ultra compact design ...

Second and third units on a single rack are ordered as AO-50. AO-50 units can also be ordered individually to add to previously purchased RM-50.  For use with all -50 series units.

Frequency Response DC - 45 MHz @ -3dB (1 V pp input signal)Input Signal Level .05 - 2.0 V pp (within -1 volt to +1 volt range from ground)Input Configuration > 2K OhmsInput Coupling DCOutput Connectors BNC 6 OutputsGain 0.5X to 2.0X, ...

The RU-VDA4 is the ideal choice in most applications where video signals need to be distributed. Video inputs and outputs are made on the front panel via BNC, PHONO, or type F jacks. Power connections are made using full-size barrier block ...

 1X4 SVHS Video Distribution Amplifier.The SVDA-1 is a 4 output S-Video distribution amplifier designed for the Broadcast, Video Production and Multimedia environments. Its most common application will be to distribute the output of a ...

The Kramer 401C combines the functions of a distribution amplifier and encoder in a single compact unit. It accepts one s-Video (YC) input and distributes the signal to a total of four outputs, two of which are s-Video, and two that are ...