Clip-On/Miniature Mics and Acoustic Pickups

Cardioid microphone suitable for many different applications. It considerably reduces pick-up of a reverberant room. This is helpful in rooms with poor acoustics or when disturbing sounds impinge mainly from the rear.Features: Cardioid ...

Supercardioid microphone that gives higher attenuation of off-axis sound from the side than its cardioid sister model. It is ideal for recording soloists, where the requirements for lateral acoustic separation are higher.Features: ...

Installed beneath the bridge saddle, this pickup is perfect for all 6-stringed acoustic guitars. This design features Anti-Feedback construction and is machined to provide an even tonal response.

The DPA 4021 is a phantom powered (P48) condenser microphone using the same type of cartridge as the famous DPA 4011, but is preamplified using a built-in ultra-small thick-film mounted FET-preamplifier. The result is the world's smallest ...

Easily mounted to the inside of any acoustic instrument. Fully shielded against hum and retains the natural sound of the instrument free of color or added tone. Furnished with Fas-Jac 1/4" strap button mono jack.

 Ideal for classical and steel-stringed guitars, dulcimers and other acoustic instruments with soundboards.   Furnished with Barcus-Berry's exclusive Fas-Jac(TM) º" strap button mono jack or º" external mount output ...

Ideal for classical and steel-stringed guitars, dulcimers and other acoustic instruments with soundboards. Furnished with Barcus-Berry's exclusive Fas-Jac strap button mono jack or external mount output jack. Both models are easy to ...

Fits Shure transmitters: All with TA4F connector (Tiny QG)The ISOMAX 2 is a Countryman classic, still delivering the industry’s tightest pattern control for an all-purpose mic. Available in omni, cardioid, and hypercardioid patterns, ...

Full musical range of upright basses. Delicate tones to deep lows. Clamp style. Easy to attach and remove. No drilling or tools. Includes Preamp.

Mounts on top of the guitar adjacent to the bridge. For use with virtually any flat top or arch top guitar. Installation requires no tools nor alterations to the instrument. Perfect for recording, broadcast or live performances where its ...

Select-quality replacement bridge. Factory-installed piezo-type transducer. Traditional fit. Superb acoustic performance. Unequalled acoustic-electric capability. Includes model 3100P 1/4" output jack.

Delivers studio quality sound. Totally moisture-proof, excellent dynamic range and provides a clean reproduction of the original sound. Ideal for use with both analog and digital effects and also the perfect choice for use with wireless ...

Mono Phantom Powered c-ducer with 1 x 8" (20cm) C-ducer Tape Microphone.Kit Includes: 1 x microphone, 1 x Pre amp, 1 x Spare reel Hi Low Tape, 4 x Spare Sticky Pads, 1 x Pre Amp Clip S/A, 4 x Cable Clips, 1 x ManualSpecifications: Output ...

Flex. The E 608 has a newly developed clamp and goose-neck mounting which enables the capsule to be positioned close to the signal source for high realism, high level output. Extensive damping and shock mounting isolates the capsule and ...

The AMT ERTS is the second generation percussion microphone system from AMT. Designed, manufactured by hand, and distributed by Applied Microphone Technology in the USA. The ERTS is a mini condenser microphone for professional live and ...

The AMT P800 Trumpet microphone system is the only system on the market specifically made to handle the highest SPL levels that a trumpet can reproduce. The element, somewhere in size between a small and large diaphragm is hand made by AMT ...

The AMT P800 trumpet microphone system is the only system on the market specifically made to handle the highest SPL levels that a trumpet can reproduce. The element, somewhere in size between a small and large diaphragm is hand made by AMT ...

The AMT P800 Studio Trumpet microphone system is the only system on the market specifically made to handle the highest SPL levels that a trumpet can reproduce. The element, somewhere in size between a small and large diaphragm is hand made ...

The WS is a low profile double condenser microphone that attaches to the clarinet, alto and bass flue, or oboe with an ultra-miniature low mass clamp. It is specifically designed for the timbre of the clarinet. The microphone provides pure ...

The AMT WSW-Shure microphone system allows the player to directly connect the most natural sounding woodwind and brass microphone with any Shure belt pack transmitter/wireless system. The WS comes wired directly with a 4-pin connector to ...