Clip-On/Miniature Mics and Acoustic Pickups

Installed beneath the bridge saddle, this pickup is perfect for all 12-stringed acoustic guitars. This design features Anti-Feedback construction and is machined to provide an even tonal response.

The e908d condenser instrument microphone was especially designed for drums and percussion.Features • Exceptionally lively, clear sound • Easy and flexible set-up, comes with drum-set clamp • Optimal ...

The e908b condenser instrument microphone was especially designed for brass instruments.Features• Exceptionally lively, clear sound• Quick and flexible set-up; comes with mounting clamp• Optimal positioning with long-necked, ...

The Electro-Voice model RE920Tx is a cardioid condenser mic, designed specially for wireless use with musical instruments. It includes a specially designed instrument-mount clip assembly, which securely holds the mic in place, while ...

The F-90 is a miniature pre-polarized condenser microphone that is very low profile and is exceptionally easy to use. Designed primarily for use with drums and percussion, the F-90 will fit into very tight places and can be used beneath ...

The ISOMAX 2 is a Countryman classic, still delivering the industry’s tightest pattern control for an all-purpose mic. Available in omni, cardioid, and hypercardioid patterns, the Isomax 2 offers true frequency-independent pattern ...

 The 4071 features a specially designed, fixed microphone grid with a soft presence boost of typically 5 dB at 4 - 6 kHz. Speech intelligibility, clarity and definition of voices and instruments lie within the area that the 4071 grid ...

The DPA 4028 is a phantom powered (P48) compact condenser microphone using the same type of cartridge as the 4015-TL wide cardioid microphone, but is preamplified using a build-in ultra-small thick-film mounted FET-preamplifier.The 4028 ...

The Type 4023 is a phantom powered (P48) condenser microphone using the same type of cartridge as the famous Type 4011, but is preamplified using a build-in ultra-small thick-film mounted FET-preamplifier. The 4023 has a standard ...

The DPA 4026 is a phantom powered (P48) compact condenser microphone using the same type of cartridge as the 4015 wide cardioid microphone, but is preamplified using a build-in ultra-small thick-film mounted FET-preamplifier.The 4026 has ...

The Opus 86 condenser microphone has been developed for micing accordions and Styrian harmonicas. The cardioid microphone capsule features a high-gain-before feedback and the frequency response has been optimized for live applications. Due ...

The Type 4027 is a phantom powered (P48) compact condenser microphone using the same type of cartridge as the 4015 wide cardioid microphone, but is preamplified using a build-in ultra-small thick-film mounted FET-preamplifier.The 4027 has ...

Preamp for 4000. Piano or Harp.Specifications Input Interface: 1/4" unbalanced Input Impedance: 2.2 Met Ohms Maximum Input Level: 2.0 VrmsMonitor Output Output Interface: 1/4" unbalanced Output Impedance: 2k ohms THD: .005% @ ...

The ultimate miniature condenser microphone for drums and percussions. Its cardioid polar pattern rejects overspill from nearby instruments. A continuously adjustable vise-type clamp makes it easy to fix the microphone securely on the top ...

The ultimate miniature condenser microphone for drums and percussions. Its cardioid polar pattern rejects overspill from nearby instruments. A continuously adjustable vise-type clamp makes it easy to fix the microphone securely on the top ...

The C 519 clips onto the bell of a trumpet, saxophone, trombone, tuba, or any other wind instrument (e.g. didgeridoo). Room to move for the wind section at last! Its tight cardioid polar pattern makes the C 519 an ideal tool for use near ...

The C 519 clips onto the bell of a trumpet, saxophone, trombone, tuba, or any other wind instrument (e.g. didgeridoo). Room to move for the wind section at last! Its tight cardioid polar pattern makes the C 519 an ideal tool for use near ...

The same as the M-100 (PRO-M10-0MA), but includes a Carpenter style (1/4" output jack that mounts to the side of the instrument. An impedance matching preamp is recommended, but not required.Professional installation is recommended.

Delivers studio quality sound. Totally moisture-proof, excellent dynamic range and provides a clean reproduction of the original sound. Ideal for use with both analog and digital effects and also the perfect choice for use with wireless ...

Omnidirectional microphone ideal for recording large and small sound sources, for a "Decca Tree" or for use in an OSS "Jecklin Disk" array. It does not suffer from a proximity effect, and is a good choice for close-miking. The extra octave ...