Cables Wireless Audio forTransmitters/Receivers, Instrument, Output, Adapters

4-foot (1.3 m) microphone adapter cable, 4-pin mini-connector (TA4F) to XLR (female) connector. connects the T1, T11, LX1, SC1, or U1, UC1, UT1 body-pack transmitter to a dynamic or battery-powered condenser microphone.

Instrument cable (3.5 mm) for Evolution Wireless series microphones.Instrument input cableThe instrument cable found in EW172, EW372 and EW572 instrument systems. Molded 1/4" plug on a 40" cable with a molded Evolution Wireless mini plug ...

Right Angle Guitar Cable, 2-foot (0.7m) 4-pin Mini Connector (TA4F) with Right-Angle 1/4-inch Connector, used with T1, SC1, SLX1, LX1, U1, UC1, ULX and UT1 Bodypack Transmitters T1, SC1, PG1, PGX1, SLX1, LX1, U1, UC1, ULX, UR1 and UT1 ...

XLR unbalanced line output cable for the EK100 (only) with 1/8" (mini) male to XLR male connectors.

Cable for Sennheiser Evolution Wireless. XLRF-3.5mmLine input cable for bodypack transmitters (optional)Female XLR plug on a 40" cable with an Evolution Wireless mini plug on the other end. A great solution for situations where line ...

Right angle guitar cable for wireless body pack transmitter.Right-angle instrument input cable (optional)High-quality right angle 1/4" instrument plug on a 40" cable with an Evolution Wireless mini plug on the other end. A great solution ...

Que Audio's DACAA3E is a 4 ft. black cable with compact connectors at each end.

3.5mm Line Cable for Evolution Wireless microphones.

The SWA3EC is an Airline Synth EC10TX cable SE10T to P3 (3-pin) cable.

For use with Rode's HS1 headset mic, Pinmic, and Lavalier, the MiCon-1 connector works with the following Sennheiser wireless systems: SK500 SK300G3 SK100G3 SK500G2 SK2-Freeport

Que Audio's DACAA3E is a 4 ft. beige cable with compact connectors at each end.NOTE: Shown above in black, comes in beige.

Cable for Sennheiser Evolution Wireless. XLRF-3.5mmLine input cable for bodypack transmitters (optional)Female XLR plug on a 40" cable with an Evolution Wireless mini plug on the other end. A great solution for situations where line ...

Audio cable for SR Receiver. TA3F plug to XLRM; 12" long.

The KA100s-TA5F is a cable for Me102/Me104 lavalier capsules with a mini 5pin XLR female connector for use with Lectrosonics M-Series transmitters. It has been wired with a 330pf capacitor to reduce Rf ...

The MAC-G3 uses low noise George L guitar cord for the Electro-Voice BPU-2 and WT-500 bodypack transmitters. Using the MAC-G3 with the EV RE-2 exclusive guitar optimization gives you one of the most “wired-sounding” ...

For use with Rode's HS1 headset mic, Pinmic, and Lavalier, the MiCon-4 is a wireless adapter for use with the following Audio Technica UniPak wireless body pack systems: 1800 Series 2000 Series 3000 Series

Output Cable, TA3F Connector to Stereo Miniplug Connector, used with VP3 Receiver.

Audio-Technica guitar input cables feature quality construction and state-of-the-art professional connectors for affordable & reliable performance. 1/4" right-angle connector to locking 4-pin connector for use between instrument ...

For use with Rode's HS1 headset mic, Pinmic, and Lavalier, the MiCon-3 is a wireless adapter for use with the following Shure wireless systems: UR1 UR1M ULX1 SLX1 PGX1 PG1

Input cable for A-T UniPak body-pack transmitters with XLRF to 4-pin connectors. For Lo-Z mics with XLRM-type output terminations.