Audio Test Equipment

The intelligent, CPU-controlled CT100 accepts virtually any connector type: XLR, mono and TRS phone ( 1 /4 ", 1 /8 ", TT), RCA and MIDI. It shows which input pin is connected to which output pin. Separate LED’s indicate proper shield ...

Galaxy Audio's CHECK MATE is an inexpensive tool that meets the same IEC 651 Type 2 standards of SPL meters that cost 5 times as much or more.  The CHECK MATE allow musicians, sound contractors, and others to measure ...

Since its introduction in 1997 the Qbox has become one of Whirlwind's most successful "Black Boxes" ever. Now, they have added the features that have been most requested by Qbox users over the years: A quieter headphone ...

Goldline's ZM1P measures the impedance of loudspeakers and entire distributed loudspeaker systems as well as individual components (resistors, capacitors, inductors).  It will also calculate the wattage that will be produced on ...

Many of the same features as the CM-100 but at a lower price. It features a max function resolution of 0.5 dB with accuracy of ± 2.0 dB, range of 40-130 dB with 30dB of dynamic range covering 125Hz-8kHz. Battery life 110 hours. ...

 The ECM8000’s linear frequency response and omnidirectional polar pattern allows you to carry out measurement and alignment tasks with minimum hassle and maximum precision, making it a perfect complement for our ULTRA-CURVE PRO ...

This versatile cable tester checks most varieties of audio cables. Can test cables with any combination of XLR, 1/4" of RCA phono plugs for shorts, opens, and phase. Hands-free design allows manipulation of cable to locate intermittents. ...

Minirator MR2 is a powerful audio generator, offering a full range of useful analog test signals for calibration, maintenance and repair of professional audio equipment.The rotary settings wheel combined with surrounding fast access ...

Fast, accurate, and easy to use, the Batt-O-Meter: saves you from risk and stress before a performance saves you money by extending the life of each battery saves you time by checking battery life BEFORE you take things apart save ...

Audio level indicator mounted on a rack-mount panel, horizontal version of the ES-215P2. The indicators provide a purely digital representation of an audio signal's loudness. The unit features fourteen LED's (nine Green, one Yellow and ...

No larger than a standard microphone connector, GTC Industries' Tone Plug is a unique audio test instrument capable of generating a variety of test signals for the rapid troubleshooting, analysis and calibration of audio systems and ...

Hi-Z to Lo-Z transformer BLOX

The Rat Pack is composed of two small pieces, the Sniffer and the Sender. The Sniffer works on either phantom power alone or power supplied by the Sender. The Sniffer shows the cable is good or has faults via three two-color green and red ...

Checks XLR, 1/4", RCA, 1/8", TT & MIDI cables for continuity and/or intermittant connections. Also detects opens and shorts for each pin. Other features include test tone generator (+4, -10, Mic), phantom power detector, grounded XLR ...

NOTE: The ZM1P is pictured above in lieu of an available photo for the ZM1.  We apologize for any inconvenience this may cause.Useful to sound contractors and installers, Goldline's ZM1 measures the impedance of loudspeakers ...

The MM 1 is a measurement microphone which has been designed specifically for measuring sound reinforcement and PA-systems. It is designed to work with spectrum analysers for measuring frequency response and sound pressure levels of loud ...

1:1 600 Ohm signal isolation BLOX

The MR-PRO is an extremely powerful analog audio generator to satisfy every need for the professional engineer. Proprietary user wave forms may be loaded via USB into the internal flash memory.Innovative and unique technology includes ...

Goldline's GL1K microphone input tester consists of a tone generator and a phantom power detector built into a standard 3-pin XLR male connector.  When inserted into a microphone input connector, the LED indicator will light ...

The CAB DRIVER checks the operation of the speaker components within enclosures. A pink noise signal source is sent through pushbutton selectors to an assortment of speaker connectors, including Speakon NL8 and NL4, 1/4" TS and banana ...