Audio Test Equipment

These tapes contain a series of recorded sine-wave signals for general-purpose use for standardizing azimuth, equalization, and sensitivity (usually called "gain" or "level") of open-reel analog audio magnetic tape reproducers.  They ...

These test tapes contain a recording of a 3150-Hz sine wave, for use in measuring weighted peak flutter and tape speed according to current national and international standards.According to IEC Standard 368 and other standards [1],[2], the ...

These tapes contain a series of recorded sine-wave signals for general-purpose use for standardizing azimuth, equalization, and sensitivity (usually called "gain" or "level") of open-reel analog audio magnetic tape reproducers.  They ...

These tapes contain a series of recorded sine-wave signals for general-purpose use for standardizing azimuth, equalization, and sensitivity (usually called "gain" or "level") of open-reel analog audio magnetic tape reproducers.  They ...

Contains over 80 test signals, laid out in a logical progression for quick calibration and debugging of 5.1 channel systems with THX Surround EX. Contains:Midrange Pink NoiseWideband Pink NoiseLF Pink Noise1/2 Point Check ...

MiniLINK is a USB PC interface and Windows software option for the ML1 and DL1 audio analyzers.  MiniLINK is already included with the AL1 Acoustilyzer. MiniLINK displays results, transfers data to PC, and remotely operates the ML1 ...

The "best" test signal to use for calibrating your tape reproducers depends on the measurement equipment that you have, the flexibility of the adjustments on your tape reproducers, and the level of service work being done.Although there ...

Standard tripod connector with single lock pan head.  The tripod extends to 5 height positions from 11" to 3'8".  Tripod carrying case included.

Hand-held SPL Meter to 162 dB SPL.  Class 2 filters per ANSI S1.4.Specifications: Measurement Range:- Mic Input: 100dB - 162dBSPL- Line Input: -60dBm - +10dBmInputs:- Microphone: Detachable 600 ohmomnidirectional electret condenser, ...

Features/Specifications: Single LED positive-going pulse with 1s repetition rate. PG Line Pulse Output:Amplitude: APT2 - 0.4V peak typical / APT2B -0.8V peak typical.Rise time: <100 µs.Fall time: 40mstypical.Duty factor: 0.3% ...

Goldline's PN3BPink Noise/Tone Generator provides pink noise or a 1kHz tone in continuous or gated format.  Pink noise has an equal amount of energy per octave of bandwidth.  The gate function allows control of the Pink ...

Hand-held SPL Meter to 120 dB SPL. Class 2 filters per ANSI S1.4.Specifications: Measurement Range:- Mic Input: 47dB - 123dB SPL- Line Input: -70dBm - +5dBmInputs:- Microphone: Detachable 600 ohm omnidirectional electret condenser, ...

The RB-SD1 Silence Detection Unit is used to monitor an unattended stereo studio feed and in the event of the signal going 'quiet' after a given period the unit will switch through an alternative stereo audio signal. This signal could be a ...

DL1 Digital Audio Analyzer provides comprehensive measurement, analysis of both embedded digital audio and digital format carrier signals with 32k-96k sampling rates at 8 to 24 bits. Handles AES, IEC/SPDIF and ADAT digital audio ...

For ProKit applications.  Lockable metal case with pre-cut pockets for DSP30/DSPCIW, Microphone, Battery Eliminator, Noise Generator, Test CD/DVD, Cables or similarly sized items.  Comes with shoulder strap and two ...

Goldline's PWN1 Personal White Noise Generator produces an adjustable audible random sound with an equal amount of energy per Hertz (Hz) of bandwidth, normally referred to as "White Noise".  This sound can be used to acoustically mask ...

These tapes contain a series of recorded sine-wave signals for general-purpose use for standardizing azimuth, equalization, and sensitivity (usually called "gain" or "level") of open-reel analog audio magnetic tape reproducers.  They ...

These tapes contain a series of recorded sine-wave signals for general-purpose use for standardizing azimuth, equalization, and sensitivity (usually called "gain" or "level") of open-reel analog audio magnetic tape reproducers.  They ...

The SC Series Testers provide rapid, positive testing for multiline speaker cables.Rotating the central switch applies voltage to the cable conductors one at a time. A SEND LED indicates the pin to which the voltage is being applied, and a ...

The SC Series Testers provide rapid, positive testing for multiline speaker cables.Rotating the central switch applies voltage to the cable conductors one at a time. A SEND LED indicates the pin to which the voltage is being applied, and a ...