Attenuators, Pads

The Shure A15RF In-Line RF Attenuator provides all types of balanced audio sys-tems with greatly improved immunity to radio frequency interference (RFI). It is especially useful in applications where balanced audio devices near strong RFI ...

Use this balanced-line attenuator to prevent low-impedance microphones (rated at 150 or 600 ohms) and high-output condenser microphones from overloading low impedance inputs in high sound pressure level applications. The values of ...

This switchable input attenuator is great for stepping-down input level to a mixer when the level is too high. Maybe you've got a hot microphone in fromnt of a loud source, and you're "pegging the meters" at the board. Just insert the ...

Input a line signal into a mic pre or match levels between two pieces of gear with these precision in-line H-pads.

Input a line signal into a mic pre or match levels between two pieces of gear with these precision in-line H-pads.

10 dB Mic Attenuator( XLR-F to XLR-M)

This unit has a balanced bridging input with 100 kilohm input impedance and 50 dB loss. Use the A15LA to connect high-level line or Aux Outputs to low-impedance microphone inputs. It will attenuate the output from such devices as mixers, ...

Input a line signal into a mic pre or match levels between two pieces of gear with these precision in-line H-pads.

Input a line signal into a mic pre or match levels between two pieces of gear with these precision in-line H-pads.

MAX-20 provides 20 dB attenuation (pad). XLR female to male connector.

The Audio-Technica AT8202 Adjustable In-line Attenuator is designed to prevent balanced low-impedance microphones from overloading electronics having low- to mid-impedance inputs in high-SPL applications. The adjustable attenuator is ...

Repack/Box OpenUse this balanced-line attenuator to prevent low-impedance microphones (rated at 150 or 600 ohms) and high-output condenser microphones from overloading low impedance inputs in high sound pressure level applications. The ...

M-Audio's MicroTrack 10dB Pad is a specially designed attenuator for the 1/8" microphone input on the MicroTrack, or any device with similar output impedance and phantom power characteristics.  It reduces the output of a connected ...

When any model of Earthworks High Definition Microphones are used for close micing drums the output level of the microphone can be very high (as much as +24dBV) which may overload the input of some microphone preamplifiers. However, ...

ML1 Adapter -20dBThis adapter extends the balanced input range of the Minilyzer up to +40 dBu. This accessory is ideally used when measuring amplifier power output.Accuracy is 0.1% balanced to balanced.

 InLine Switchable Audio Pad 150/150 ohms. Model HK-112 Audio Pad allows for finer steps of attenuation, 2.0 dB steps from 10 dB to 40 dB. This unit can be ordered at 600/600 ohm, 150/150 ohm and 600/150 ohm impedances. The low end ...

The AT8684 is a versatile attenuator that permits easy in-line switch installation and flexible application. Type of external single-pole switch the user supplies determines muting function; closed contact causes muting. Use for on/off, ...

30 dB Mic Attenuator (XLR-F to XLR-M)

Sescom SES-MKP-29 Professional Anywhere for Anytime Single Channel Balanced Audio Level Control with XLR Connectors.Every audio professional needs these. No fancy explanations, just a level knob, an input XLR connector and an output XLR ...