Antenna Distributors/Combiner/Splitters for Wireless

Active splitter kit for 8 receiver system using front-mount antennas. Includes: 2 ASA1/NT 2 GA3 rack kits 1 AM2 2 BB1 cables

Lectrosonics' UMC16B multi-coupler combines ceramic filtering with low noise, high intercept point RF distribution to provide outstanding performance and flexibility.  Up to eight diversity receivers can be utilized in up to a ...

USEDThe AKG PS4000W Antenna Splitter is capable of distributing signals to up to four SR4000 receivers. The PS4000W features 2 BNC antenna inputs and 4 BNC outputs. Each antenna input provides a 12VDC voltage for powering up to 3 active ...

The TOA Wireless Antenna Distributor WD-4800 is designed to be used in conjunction with VHF/UHF band system. It comes with two channels, in which two input signals are mixed and distributed to four outputs. The WD-4800 also has four DC ...

ANSR Audio's AW-DU provides an easy method of connecting as many as 4 receivers to the same set of antennas. The AW-DU also provides power to the same set of recievers.FEATURES Required cables included Rack mount kit ...

Passive antenna splitter 1 x 1 : 3. DC-coupled for use with antenna boosters Special version with powering also available for using A 12 antennas with EM 3031/32 receivers.Specifications: Frequency range 30-950 MHz Max. current 0.3 A DC ...

Antenna distribution system. Combines 4 systems with one set of antennas and power supply. Includes all BNC and jumper cables.

The ACS-101 (Antenna Combiner-Splitter 10-to-1) is an amplified and filtered broadband splitter-combiner. It allows up to ten UHF base stations to use only one transmit and one receive antenna. The antenna combiner section contains ...

Antenna combiner for indoor and outdoor use, specifically, for near-field antenna setups with no preferred direction. Features a linear DC coupled power splitter in an aluminium alloy case, 2 inputs, 1 output, reverse operation possible ...

Antenna distributor amplifier with cables and terminators.

Combines antenna signals of up to four SST 4 stereo transmitters Powers transmitters via antenna lines Daisy-chaining capability for setting up multichannel systems

The LA-80 is a passive device (no power supply needed) that takes two incoming RF signals and combines them into one outgoing antenna source. The combiner is used in applications where up to two different antenna sources are required and ...

The MB-8N tuner base unit accommodates up to four WRU-8N tuner units, and it includes a built-in antenna divider making it easy to daisy-chain up to four of these base units to form a 16-channel system. The MB-8N excels in remote operation ...

Active broadband antenna combiner for up to eight transmitters to one antenna 1RU does not require additional power supply.

The ASA 3000 is an active antenna splitter for multi-channel wireless microphone systems with up to 16 channels (8 x EM 3031, 8 x 3032 or 8 x EM 3532). It works well with the entire UHF range, and can be equipped with selective ...

The AC 3200 is an active, high-power 8:1 antenna combiner for large multi-channel wireless monitoring systems. It combines up to eight channels for transmission via one antenna. The AC 3200 features a broadband design, with the frequency ...

Two-way passive RF splitter 10-1000 MHz Isolation dB (L=25, M-35, U=25) Loss at each output dB (L=3.2, M=3.5, U=3.7)

Four-way passive RF splitter 1-1000 MHz Isolation dB (L=25, M-23, U=20) Loss at each output dB (L=6.4, M=6.6, U=7.6)

The SWA6SS-U-M9 is an antenna distributor amplifier with cables and terminators. It is part of the SWM6000 series and operates in the 915 MHz range.

This antenna combiner actively combines four antenna outputs from up to four PSM wireless transmitters to a single antenna, improving RF performance and reducing rack clutter. 470-952MHz.SPECIFICATIONS RF Carrier Frequency Range - 470-952 ...