Accessories for Signal Processors

The OP-1 provides an easy rack mounted connection for the line level inputs and speaker level outputs for a 2 channel bi-amped system. The line level inputs consist of a combo XLR-F and 1/4"-F TRS is wired in parallel with a rackmounted ...

RS232-RS485 converter kit from XTA. D-type to male XLR cable and female XLR to RJ45 connector.Includes: 1 x KK Systems “K2” RS232-RS485 converter 1 x 9 pin D-type male to 3 pin XLR male adapter 1 x 3 pin female XLR to RJ45 ...

Dual unit mounting rack for the LA-3A. Includes two strapping plates.

10k: 10k ohm line input transformer for D-1103, E-1231 and L-1102.Easily and permanently mounts inside equipment.

Goldline's RT60 Option measures the reverberation time of a room.  The reverberation time is how long it takes for a sound to decay by 60dB in a room.  Measurements taken can be stored and printed.  No computer is needed ...

Goldline's OPT-106 1/6th octave mode option allows the user to shift the DSP analyzer to a higher frequency resolution.  Higher resolution is used to set crossovers or analyze frequency or standing waves.  The higher ...

Goldline's OPT-112 1/12th octave mode option allows the user to shift the DSP analyzer to a higher frequency resolution.  Higher resolution is used to set crossovers or analyze frequency or standing waves.  The higher ...

Goldline's Noise Criteria option software allows the DSP analyzers to analyze room environments and to compare the sound spectrum to official Noise Criteria Standards.  Results in the NC range of 63Hz to 8kHz are compared to the ...

The Rane PR-2 is a 5-wire wall mount page assign remote control for use with the CP-64 and CP-52 processors. Selector logic is active low BCD with pull-up provided in the CP 64. It has two selector knobs for sending two page signals to any ...

The EVE/NET Network Remote Control System is a sophisticated approach to controlling multiple audio processing units. It allows essentially any number of small remote control units to select from and control essentially any number of rack ...

Rane security cover 1 space.

Rane security cover 2 Space.

Goldline's Distortion Analysis Option provides software required for the DSP analyzer to measure total harmonic distortion (THD) from 0.02% to 9.99%.  An external signal generator such as Gold Line's Model TS1 or TS2 is required ...

Goldline's Privacy Index option provides the STI/PI test signals and software needed to conduct measurements and evaluate masking procedures.  For use with DSP30/DSP2/DSPCI analyzers.  Options kits contains upgraded ...

External power supply unit for Bag End processors.

Goldline's Speech Intelligibility option provides the STI test signals and software needed to conduct measurements in accordance with IEC standard 60849, ANSI S3.05, ISO 9921.  For use with DSP30/DSP2/DSPCI analyzers.  ...

Goldline's Privacy Index option provides the STI/PI test signals and software needed to conduct measurements and evaluate masking procedures.  For use with DSP30/DSP2/DSPCI analyzers.  Option kit contains upgraded EEPROM ...

Goldline's OPT-IMP impedance software option allows the analyzer to measure the impedance of a item when used in conjunction with a sine wave generator such as Gold Line Models TS1 or TS2.  For use with DSP30, DSP30RM, DSPCIW ...

Goldline's Dosimeter software option allows the DSP analyzer to analyze an environment, view results and print reports showing Max Peak SPL, Average SPL, Accumulated Dose and Octave analysis.  This is the information necessary when ...

The TC G-Card contains 245 optional presets created by pro guitarist like Paul Jackson JR, Eric Johnson, Vernon Reid, Steve Vai, Frank Gambale, Dweezil Zappa and Bob Bradshaw. The presets reflect the style of the artist and vary from ...