Accessories, Mounts, Video Processing

Power a single BrightEye unit with this universal (100/240V, 50/60hZ) power supply. 

Power Supply for VideoHub series routers. 12V 150W 

The AC402-101 is designed to mount Altinex's compact distribution amplifiers (DAs) to a table, desk, podium, or other surface. Due to their compact design, some DAs do not have mounting holes for brackets. With the foam tape on the ...

When displays are switched away or disconnected and then reconnected, the EDID can be lost and the computer can lose the ability to display the image properly.Gefen's EXT-DVI-EDIDN DVI Detective solves this problem by memorizing the EDID ...

The Sony HFBK-HD1 is an optional HD output board that is designed to be installed in the Sony BRC-H700 3-CCD PTZ cameras. This particulat board permits output of HDTV signals in both analog and digital domains. This board has two ...

VGA + Audio Pass-through Plate, 15-pin HD Female to 15-pin HD Female; 3.5mm Stereo Mini to Terminal Block, White.

The ICS2000 is a 1-In, 1-Out VGA and Audio Line Driver designed for installation into a wall. The unit provides a method of transmitting signals to a remote display and audio receiver or amplifier. The ISC2000 offers a female VGA-type ...

For desktop applications like editing and graphics, use the V-CB1 stand to reduce the footprint of the conversion or distribution module. The V-CB1 stand provides a sturdy base with a secure attachement to the module while reducing the ...

Single RU (1.75" tall) Conversion and Distribution 2 Module Bracket, Two Marshall Electronics 7.75" wide or one 7.75 ' plus one 4.75" wide conversion or distribution modules can be securely installed into a standard EIA 19" rack with the ...

The Kramer VA-50P is a six outlet power supply designed to operate Kramer products which normally use an external 12VDC power transformer. This includes all units in the VM-50, VS-55, and VM-3 families, the Kramer TOOLS and Pico TOOLS ...

VGA + Audio Pass-through Module, 15-pin HD Female to 5 BNC; Stereo Mini Jack to Terminal Block, Ivory.

High definition analog component interface module for the AWS-G500 Anycast Station. Module supplies 2 high definition analog component inputs, as well as 1 HD analog component video output, and accepts both 1080i and 720p signals. Full ...

VGA + Audio Pass-Through Module 15-pin HD Female to Terminal Block; Stereo Mini Jack to Terminal Block, Ivory.

The DA1294FC is a set of 2 ears used to rack-mount a single 1/2 rack-wide unit in a standard 19" wide, 1U high rack space. It may be used with the following products: ...

Most of VAC’s distribution amplifiers take advantage of the properties of individual floating (ungrounded) power sources (AC adapters) to provide some inherent ground loop and interference protection.By using a floating power source, ...

Rackmount accessory for the legacy series VAC bricks. Mounts up to four bricks in one rack unit space. Front panel faceplate and slide mounts.

Analog video input card.For users who require input from a range of popular analog video formats including composite video, S-Video (Y/C) and component (Y:U:V).  Built-in TBC syncs each input, enabling non-genlock gear to be used ...

19" rack mount for Cobra-DA9 distribution amplifier and Cobra-MX-88 8x8 & twisted pair matrix switcher.

Kramer's Cobra SKEW is a daughter-board that installs inside a Cobra R1300 series long range receivers.  It corrects skew (delay) errors in long twisted pair cable runs which are seen as mis-convergence on the display. Adjustment ...

The TV One RM-370T rackmount kit is a rackmount kit designed for use with AV-701/702 series products. It will accommodate up to 3 units from this series in a 19" equipment rack.