1/4" to XLR Adapters, Transformer Type

The MIT-129 is for impedance matching of a high impedance 1/4" phone equipped source (like an electric guitar) into a low-impedance (mic-level) XLR type input.

Impedance transformer, XLR3F to 1/4" TS. This adaptor is designed to match 200R output impedance to 50K input impedance. It is ideal for connecting a microphone to hi-Z instrument jack. Maximizes signal fidelity when using ...

To run a low-impedance XLR terminated line (like a pro microphone) into a high-impedance 1/4" phone input (like a guitar amp input), it's often necessary to use a line matching transformer like our MIT-176.

Economy low- to high-impedance microphone matching transformer provides 24 dB of voltage gain and may be used in reverse. * Balanced 3-pin XLR female input * Built-in 1/4" male phone plug output

Converts low-Z XLR-type microphone input to bridging 1/4" line-level input. Allows low-Z XLR-type inputs to be used as line-level inputs (typically from unbalanced keyboards) to eliminate "de-normalizing" of tape signals and excessive ...

This transformer connects microphones with an XLR-type connector to the 3.5 mm (9/64 inch) inputs found on camcorders and other recording devices. It increases the signal level from the microphone, provides a balanced input, and prevents ...

Neutrik's NA2M-J-TX is a 3-pole XLR male to ground-liftd 1/4" jack miniature transformer balancing adapter. It is a low cost solution for unbalanced/balanced line conversion and passive DI applications, where no earth or gain ...

This reversible transformer matches low- or high-impedance microphones to high- or low-impedance inputs. The transformer permits use of very long microphone cables with either low- or high-impedance microphones. However, when connecting a ...

This completely reversible transformer matches low-impedance microphones to high-impedance inputs or high-impedance microphones to low-impedance inputs. The transformer permits use of very long microphone cables with either low-impedance ...

Pro Co's ITX-Q is the same as their ITX audio isolation transformer, except with a 1/4" (ø6.35mm) phone plug input. Male XLR-type output Tip wired in-phase with pin-2 Usable for 600 Ohm 1:1

Converts low-Z microphone to high-Z input for connecting a low-Z microphone to a high-Z PA input. Female XLR-type input. 1/4" (6.35mm) phone plug output. Uses 150/15k ohm transformer.

The Audio-Technica CP8201 Microphone Impedance Matching Transformer is designed to connect a low-impedance microphone to a high-impedance electronic input. The high-quality transformer solves the problem of excessive high-frequency loss ...

3-contact female-2conducter phone plug Z-matching Transformer. 1/4" diameter.Series 9000 Line Matching Transformers offer low-loss interconnections between high and low impedance equipment. Exclusive mu-metal shielding protects against ...

3-pin male-2conducter phone plug Z-matching Transformer. 1/4" diameter.Series 9000 Line Matching Transformers offer low-loss interconnections between high and low impedance equipment. Exclusive mu-metal shielding protects against ...

Some mixers have 1/4", unbalanced inputs designed for high impedance mics and won't accept standard balanced, low impedance microphones. This inline transformer with female XLR - 1/4" TS plug is the solution for making that connection.