This sturdy, highly effective "basket-type" windscreen has two separable halves. It is intended for use with microphones of the Colette Modular System, particularly the ORTF microphone MSTC 64 Ug.With standard CMC microphones, the basket ...

Solid foam "teardrop" popscreen, for directional capsules. Available in black.[Shown in Gray]

Stereo XLR-5F jack to two XLR-3M plugs. Color coding: channel I: yellow, channel II: red. Length: 0.5 m.

This adapter cable is a counterpart to the KCY cable. While the KCY provides signal and power leads for two microphone capsules in a single cable terminated with a Binder plug, the AK I/2C separates them again.The KCY is for connecting to ...

Output cable for compact microphones of the SCHOEPS CCM series, with a short, slender gooseneck element. 5-meter (16 ft) cable.Features: Elegant und unobtrusive Applications: Stage, theater, room microphones The gooseneck can be aimed ...

Output cable for compact microphones of the SCHOEPS CCM series, with a short, slender gooseneck element. 10-meter (32 ft) cable.Features: Elegant und unobtrusive Applications: Stage, theater, room microphones The gooseneck ...

Output cable for compact microphones of the SCHOEPS CCM series, with a short, slender gooseneck element. 20-meter (65 ft) cable.Features: Elegant und unobtrusive Applications: Stage, theater, room microphones The gooseneck can be ...

This swivel joint is used for mounting a Colette active extension tube (RC_) or extensions tube of the CCM series (RL_) or an STR support rod.

Elastic miniature suspension with swivel for CCM Compact Microphones or Active Cable with MK microphone capsule, variable angles. [Shown with microphone for illustrative purposes, not included]

This cable hanger suspends a microphone of the Colette Modular System from its cable, and allows it to be set both vertically and horizontally to nearly any angle. A tie line can be attached to a loop in the cable to keep the microphone ...

A Schoeps CMC6 mic preamp (which forms the body of the microphone), includes SG20 stand clip.REQUIRES A CAPSULE, SOLD SEPARATELY The CMC 6 is designed for standard 48- and 12-Volt phantom powering. Its circuitry recognizes the supply ...

A fur-style wind jammer for use with the Schoeps BBG basket windscreen.[Show with BBG windscreen, microphone and stand, each sold separately]

A Schoeps CMC6 mic preamp (which forms the body of the microphone), includes SG20 stand clip.REQUIRES A CAPSULE, SOLD SEPARATELY The CMC 6 is designed for standard 48- and 12-Volt phantom powering. Its circuitry recognizes the supply ...

For use on pressure-gradient transducers in light wind and as a close-speech guard. It has good efficiency, yet has only a slight influence on the sound. The foam encloses an air chamber around the microphone capsule, similar to a basket ...

Featuring stiffer elastics, the A 20 S is perfect for microphones with added accessories such as CUT filters, GVC, or SKC. A special clamp secures the microphone cable, and the microphone can be tilted to any angle. Threads 5/8" - 27 ...

The SG20 stand clamp is for a microphone with 20mm in diameter. The base of the clamp has a 5/8"-27 NS internal thread. A threaded adapter is supplied for 3/8" and 1/2" mounting. The angle can be varied continuously in the vertical ...

A windscreen for the CMIT 5U shotgun microphone. Use for situations where there is moderate wind.[Shown above with microphone, sold separately. Windscreen only]

0.5 meter (19.5”) Y-Cable (2) XLR-3F to (1) XLR-5M.

30 meter (97 ft) XLR-5F to XLR-5M cable. Kevlar reinforced, anti-twist.

The MAB 1000 mounting bar is for two or more microphones for A/B and ORTF setup. The bar features mounting for a third, central microphone placed slightly forward and can be expanded for five-channel OCT surround sound. Any distance from 4 ...