Power Supply 24Vdc @ 400mA.Specifications: Input: 100 to 240 VAC Output: 24 Vdc, 500 mA (UL, CSA) Dimensions: 1.65 in. (4.2 cm) x 2.75 in. (7 cm) x 1.45 in. (3.7 cm), nominal Efficiency: ENERGY STAR Level IV

The TX-J2 is part of the group of versatile TX series products from Radio Design Labs. The TX series feature the advanced circuitry for which RDL products are known, combined with durable, quality connectors. The ultra-compact TX series ...

Radio Design Labs' PS24V2A is a 24 volt DC Switching Power Supply, with North American cord, 2 Amp output and DC Plug. Input:  100 to 240 VAC Output:  24 Vdc, 2 A (UL, CSA) Dimensions:  2 in. (5 cm) x 1.33 ...

Typical Performance: Input: 100 to 240 VAC Output: 24 Vdc, 1 A (UL, CSA) Dimensions: 1.80" x 3.51" x 1.55" (4.6  x 8.9 x 3.9 cm) Efficiency: ENERGY STAR Level IV

The TX-1A is part of the group of versatile TX series products from Radio Design Labs. The TX series feature the advanced circuitry for which RDL products are known, combined with durable, quality connectors. The ultra-compact TX series ...

The TX-70A is part of the group of versatile TX series products from Radio Design Labs. The TX series feature the advanced circuitry for which RDL products are known, combined with durable, quality connectors. The ultra-compact TX series ...

Used to add transformer isolation to any line-level RDL product input Frequency response: 20 Hz to 20 kHz (+/- 0.5 dB) THD: < 0.05% (1 kHz) 10 kO input bridges any audio line Balanced input and output

The ST-DA3 gives you the advantages of an audio distribution amplifier PLUS you can put it where you need it. The ST-DA3 allows bridging of any audio line, adjusting the gain, and driving either high or low impedance, balanced or ...

The STD series of products is part of the STICK-ON line of products from Radio Design Labs. It is a resistive branching network with RF filtering on each of the four channels. Any channel, A through D, may be either an input or an output. ...

Audio Isolation TransformerFeatures: Studio Quality Bifilar Audio Transformer Terminal Block Transformer Connections Galvanic Isolation with 1:1 Transformer Coupling Transformer to Drive 600 Ohm Line Convenience of RDL® TXs™ ...

The ST-MX2 is used in any application requiring mixing of two audio sources. A mic may be mixed with a line level music source. Two mics may be mixed to feed the mic or line level input of a power amplifier. A mic or professional +4 dBu ...

The TX-LM2 is part of the group of versatile TX series products from Radio Design Labs. The TX series feature the advanced circuitry for which RDL products are known, combined with durable, quality connectors. The ultra-compact TX series ...

Use DTB's to quickly detach and reattach wiring harness to STICK-ON units.

The STD series of products is part of the STICK-ON line of products from Radio Design Labs. It is a resistive branching network with RF filtering on each of the four channels. Any channel, A through D, may be either an input or an output. ...

The ST-MX3 is part of a group of products in the STICK-ON series from Radio Design Labs. The durable bottom adhesive permits quick, permanent mounting nearly anywhere, or use it with RDL's racking accessories. The ST-MX3 gives you the ...

The FP-PA20A features a balanced line level input that may be connected unbalanced. A front panel gain control is designed to be adjusted either manually or with a trimming screwdriver. The gain range will accommodate standard unbalanced ...

The STA-1 is a dual-channel line amplifier with bridging inputs, adjustable gain or loss, and low impedance outputs. Each of the two identical circuits are both an electronic line transformer and a line amplifier. Hook up the STA-1 just ...

The ST-GCA3 constantly adjusts for changes in input levels, bringing up low levels, and reducing gain for high levels. The audio level is constantly adjusted to maintain the correct output. The AGC adjustment rate is switch-selectable. ...

The STM-2 is a quality low-noise microphone preamplifier designed for use in commercial sound, broadcast, and recording. The STM-2 is very flexible, with gain adjustment from off to +65 dB, two balanced or unbalanced outputs, and available ...

The EZ-MXA20 is a stereo mixer amplifier with one mic and two line inputs. Bass and treble tone controls are included. An integral compressor/limiter allows a higher sound output level without clipping than a standard amplifier. The ...