The LF-3 Low-Frequency filter, when used with the XC-3 two-way crossover, provides the low-frequency crossover to create a three-way active system. The unit mounts to the rear panel of a two-channel DCA or CX amplifiers to save cost and ...

List Price: $208.00
Our Price $165.00
You save 21% when you order today!
Usually ships in 2-3 weeks
Need it sooner? Call us!

The ModularDesign™ Series offers exceptional performance in a wide variety of applications, including houses of worship, performing arts facilities, hotels, casinos, night clubs, and sporting facilities. Specifying MD Series is ...

Our Price $1,375.00
Usually ships in 2-3 weeks
Need it sooner? Call us!

The MD-L115 shares the common form factor of the full-range systems that is also a part of the ModularDesign™ Series in a 35" tall, 30° trapezoidal enclosure.  This Low-frequency transducer features technically advanced 4" voice ...

Our Price $1,165.00
Usually ships in 2-3 weeks
Need it sooner? Call us!

The NAC-100 is a network audio controller that allows the system designer to create custom, graphical user interfaces using QSControl.net™ version 3.1 (or higher) systems. Bridging the gap between simple switch closure or potentiometer ...

List Price: $862.00
Our Price $690.00
You save 20% when you order today!
Usually ships in 2-3 weeks
Need it sooner? Call us!

The OT-600 is a heavy-duty step-up autoformer accessory that adapts any power amplifier output with a maximum voltage of approximately 40 to 50 volts to drive a 70-volt distributed line with up to 600 watts. Three voltage taps let you ...

List Price: $164.00
Our Price $130.00
You save 21% when you order today!
Usually ships in 2-3 weeks
Need it sooner? Call us!

The PB2082-i pull-back bar is used for pulling back the bottom element of the array for aiming and stability or as the primary suspension component for certain small arrays. Available in black or white. Shackle hole accepts 5/8" (16 mm) ...

List Price: $346.00
Our Price $275.00
You save 21% when you order today!
Usually ships in 2-3 weeks
Need it sooner? Call us!

The PB2082-i pull-back bar is used for pulling back the bottom element of the array for aiming and stability or as the primary suspension component for certain small arrays. Available in black or white. Shackle hole accepts 5/8" (16 mm) ...

List Price: $346.00
Our Price $275.00
You save 21% when you order today!
Usually ships in 2-3 weeks
Need it sooner? Call us!

Pullback bar for adjusting aiming angle of WideLine-8 arrays. Color: black

List Price: $689.00
Our Price $550.00
You save 20% when you order today!
Usually ships in 2-3 weeks
Need it sooner? Call us!

Kit of four Quick Release Pins for use in lieu of included bolts.

List Price: $97.00
Our Price $80.00
You save 18% when you order today!
Usually ships in 2-3 weeks
Need it sooner? Call us!

QSControl.net, QSC's next generation network audio system, achieves the seamless integration of the company's control, processing, and monitoring technologies. QSControl.net brings together QSC's digital, power amplification and ...

Call for price! Not available online.
List Price: $4117
Usually ships in 2-3 weeks
Need it sooner? Call us!

The SC28 is a 2-input, 8-output digital system controller containing pre-programmed tunings for QSC loudspeaker systems. In addition to the preset tunings, the SC28 also offers user-adjustable equalization and delay.Audio inputs and ...

List Price: $1,438.00
Our Price $1,150.00
You save 20% when you order today!
Usually ships in 2-3 weeks
Need it sooner? Call us!

The SEQ-2 is an embedded accessory that provides two independent channels of graphic equalization. Five trimpots on each channel adjust boost and cut—up to ±12 dB—at 40 Hz, 160 Hz, 630 Hz, 2.5 kHz, and 10 kHz. Each band has a Q of ...

List Price: $76.00
Our Price $60.00
You save 21% when you order today!
Usually ships in 2-3 weeks
Need it sooner? Call us!

The SF-3 subwoofer filter allows the addition of subwoofers to an existing full-range system, offering adjustable low-pass filtering and high-pass subsonic filtering with optional B6 boost and mono-summing. The unit mounts to the rear ...

List Price: $208.00
Our Price $165.00
You save 21% when you order today!
Usually ships in 2-3 weeks
Need it sooner? Call us!

The WCP-1 is a wall control plate accessories for QSControl.net network audio system components, such as Basis, RAVE, and DSP products. It allows an installer to create simple, non-computer user interfaces for these products in ...

List Price: $88.00
Our Price $70.00
You save 20% when you order today!
Usually ships in 2-3 weeks
Need it sooner? Call us!

List Price: $2,959.00
Our Price $2,365.00
You save 20% when you order today!
Usually ships in 2-3 weeks
Need it sooner? Call us!

List Price: $1,943.00
Our Price $1,555.00
You save 20% when you order today!
Usually ships in 2-3 weeks
Need it sooner? Call us!

List Price: $2,120.00
Our Price $1,695.00
You save 20% when you order today!
Usually ships in 2-3 weeks
Need it sooner? Call us!

List Price: $1,590.00
Our Price $1,270.00
You save 20% when you order today!
Usually ships in 2-3 weeks
Need it sooner? Call us!

The WL115-sw is a 15" subwoofer using a 4th order, bandpass enclosure. Tooled ports with gently rounded terminations inside and out eliminate port turbulence distortion. Mesh grilles are integrated into the port design to obstruct the ...

List Price: $2,471.00
Our Price $1,975.00
You save 20% when you order today!
Usually ships in 2-3 weeks
Need it sooner? Call us!

NOTE: BLACK VERSION OF SUBWOOFER IS SHOWN The WL115-sw is a 15" subwoofer using a 4th order, bandpass enclosure. Tooled ports with gently rounded terminations inside and out eliminate port turbulence distortion. Mesh grilles are ...

List Price: $2,471.00
Our Price $1,975.00
You save 20% when you order today!
Usually ships in 2-3 weeks
Need it sooner? Call us!