Production Intercom's SMH710 is a lightweight version their Single Muff SMH310 Headset. The construction, though smaller, is quite similar. Because it has a dynamic microphone (with flexible gooseneck and swivel mount), it ...

Production Intercom's SMH310 single-muff headset is equipped with high-quality transducers for smooth response. The microphone is mounted on a thin, flexible gooseneck boom that swivels at the ear cup and can be swung up out of the ...

Production Intercom's BP-2 portable headset station is a true 2-circuit unit, permitting the user to talk and/or listen to either or both circuits simultaneously. Separate controls are provided for each circuit.The top (or ...

Production Intercom's Blazon/4 is triggered by the same voltage which lights the normal signal lamps in the intercom system. Whenever any signal lamp button on any station in the same circuit is pressed, the Blazon/4 will be ...

NOTE: This version of Production Intercom's BLAZON-4 is for use with RTS intercoms/products.Production Intercom's Blazon/4 is triggered by the same voltage which lights the normal signal lamps in the intercom system. Whenever any ...

Production Intercom's DMH320 double-muff headset is equipped with high-quality transducers for smooth response. The microphone is mounted on a thin, flexible gooseneck boom that swivels at the ear cup and can be swung up out of the ...

Production Intercom's AD-M1 is a transceiver interface adapter for their AD913.

Production Intercom's DMH220 double muff headset features high-quality transducers that provide wide, smooth frequency response. Deep, comfortable ear cushions have excellent external noise exclusion characteristics and are ...

Production Intercom's AD913 permits communications between a cabled intercom system and any number of standard, simplex, (press-to-talk) transceivers. One of your transceivers is dedicated as 'base', and connected via its accessory ...

Production Intercom's AD-CAT5 is a CAT5 cable to intercom adapter.

Production Intercom's Blazon 180 is triggered by the same voltage which lights the normal signal lamps in the intercom system. Whenever any signal lamp button on any station in the same circuit is pressed, the Blazon 180 will be ...

Production Intercom's LSM series gooseneck dynamic cardioid microphones are designed for use in quality sound reinforcement and communications installations. These microphones have a slightly rising high frequency response and a ...

All the functions of a full-sized belt pack are retained. On/Off button are shaped differently for easy recognition by touch, in the dark. Two LEDs are mounted, one to indicate signaling (red, bright) and one (green, low output) to ...

Production Intercom's PS-2 is highly regulated 24VDC, 2 Amp (continuous) power supply capable of supplying up to 66 BP-1 Belt Packs with all signal lights lit. It can be rack-mounted or used as a table-top unit.The PS-2 features ...

Exceptionally high quality transducers provide wide smooth frequency response, reducing the onset of ear fatigue for those who must spend many hours wearing headsets. Deep, comfortable ear cushions have excellent external noise ...

Production Intercom's HS-2R/L is a combination of their HS-1 headset station and the xenon (strobe) light elements from their Blazon series. Like all HS versions, the HS-2R/L provides the same facilities as Production ...

Production Intercom's PS-3 provides the facilities necessary to power your cabled intercom system from batteries. Typically, a pair of 12V batteries are wired in series to provide 24V, then connected to the PS-3. Best because ...

Production Intercom's AD903 allows the connection of almost any other audio device, input or output, to a cabled intercom system. Typical applications include: 1) feeding the signal from a stage microphone or audio mixer output into ...

Production Intercom's Blazon/3 is triggered by the same voltage which lights the normal signal lamps in the intercom system. Whenever any signal lamp button on any station in the same circuit is pressed, the Blazon/3 will be ...

The PS-1 is a highly regulated 24VDC, 2 Amp (continuous) power supply capable of supplying up to 66 BP-1 belt packs with all signal lights constantly lit. It may be rack mounted or used as a table-top unit, when fitted with its ...