Mounts monitor to handle of select Panasonic high definition camcorders (3/8" on monitor to 1/4" 20 on camera handle). Lightweight, flexible, and heavy-duty.

Designed for Panasonic's standard body cameras with a maximum camera and lens length of 8" and a maximum weight of 3 lbs. 

PThe ARM MCM6 universal camera mount features wall, ceiling and T-Bar mounting options./PUL LIMetal construction/LI LI360 degree swivel angle/LI LI210 degree tilt angle/LI LI6" x 1.5" (including base)/LI/UL

PPanasonic's HANDLESTUD910 is a 5/8 male stud for use with their YOKE910 yoke tilt lock, which is designednbsp;for use withnbsp;their BT-LH910 LCD video monitor./P

Panasonic's FEC-3640WM is a heavy-duty wall mount for use with their AW-PH360, AW-PH400, and AW-PH405 pan/tilt cameras.

PPanasonic's FEC-50WM is a wall mount kit for their AWHE50SN and AWHE50HN pan/tilt cameras./P

Steel wall/pole mount bracket. Black. Medium duty.

 The PPMF12D is a mounting bracket and backbox for use with the POD7C in a hanging mount application. 1 1/2" standard pipe is not included

Sunshield for Panasonic's POH1000 and POH1500 outdoor camera housings. It effectively shields the housing and camera from the direct rays of the sun. Easy to install.

Panasonic direct ceiling mount for WV-CS954 and WV-CS574 dome cameras.

Pedestal mount bracket for Panasonic indoor or outdoor camera housings. It is constructed of lightweight aluminum covered with a powder coat finish.

Steel mounting base for the Panasonic WV-CW484F camera. The round steel base flush mounts to the ceiling and provides connectors for the dome.

Embedded ceiling mount bracket for the WV-CW480 series.

• Durable powder coat finish• All aluminum construction• Threaded bolt inserts to make installation quicker and easier• 60 lb load rating• Mounts to poles 3" - 15" or larger in diameter

The PRC-201C housing is designed for use in suspended or sheet rock ceiling applications. Units are sized for use with a solid state 1/2" or 1/3" camera and lens combination. Housings are manufactured from 94HB flame rated plastic, with ...

Goose Neck Wall Mount for Unitized Dome Cameras Durable powder coat finish All aluminum construction 1-1/2" pipe thread on end for quick and easy dome mounting 50 lb load rating

The PWM30G is designed to be used on either inside or outside roof top parapets, and features a 1 1/2" NPT pipe thread for mounting to the POD7C, PPFD8C, WV-CW864/CW864A and pendant mount Ready-To-Go dome housings. An access plug is ...

For parapet mounting situations, the PPRM30G offers ease of installation and service. It's designed to be used on either inside or outside roof top parapets, and a 1 1/2" pipe thread alows quick and easy mounting of pendant versions such ...

The PPEH8 is an attractive, low-profile surface mount unit. It's made of high-impact polycarbonate, with a viewing window made of the same sturdy material. The PPEH8 is easy to install, and the molded hinge makes camera access easy as ...