Neumann black elastic replacement bands for EA-87, EA-170, EA-50, EA-193, and EA-130 shockmounts.

Swivel mount with a plastic clamp for miniature microphones.  It has a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands.

Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds, windscreen accessories are available. Typically, they are made out of open-cell polyurethane foam. These ...

Swivel Mount for Neumann's TLM10, M147.  Bears a 5/8"-27 female thread and a threaded adapter to connect to 1/2" & 3/8" stands.

Mount to attach two KVF.. capsule extensions of the KM 100 system onto a tripod. Especially suited for holding long KVF.. It is easy to arrange the capsule extensions in parallel or facing each other. The double mount has a 5/8"-27 ...

The EA 87 is designed for the U 87 Ai microphone. It has a swivel mount with a 5/8"-27 female thread, plus a thread adapter to connect to 1/2" and 3/8" studs.

The auditorium hanger consists of a cable suspension and a rotating 1/2" threaded stud, to connect to e. g. swivel mounts. The stud is screwed into the threaded coupling of the swivel mount. Then the microphone can be tilted while it is ...

Neumann's 523779 is a replacement elastic band for their EA 1 shockmount.

Swivel mount for BCM 104 and other microphones. On the microphone side it has a 3/8" male thread, on the stand side a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands.

The auditorium hanger adjusts the tilting angle of a microphone suspended by its own cable.The MNV 21 consists of the tilting clamp, suitable to hold a Neumann miniature microphone or KMR 81, and a cable strain relief with a lock.

 Pop screens provide excellent suppression of so-called pop noise, such as "p" or "t". They consist of a round, thin frame covered with black gauze on both sides. A gooseneck of about 30 cm (12") in length is mounted at the popshield. ...

Windscreen for KK 105 S and KMS 105/140/150.

Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds, windscreen accessories are available.Typically, they are made out of open-cell polyurethane foam. These ...

The auditorium hanger consists of a cable suspension and a rotating 1/2" threaded stud, to connect to e. g. swivel mounts. The stud is screwed into the threaded coupling of the swivel mount. Then the microphone can be tilted while it is ...

M 252 is a folding floor stand with boom attachment. Weight 3.2 kg. The height is adjustable between 0.61 m and 1.55 m, when folded 0.56 m. The boom attachment extends from 0.46 m to 0.765 m. The floor ...

The EA 170 is designed for the TLM 170 (R) and M 149 Tube microphones. It has a swivel mount with a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands.

MF 4Floor stand with grey cast iron base. The floor stand has a matt black finish and rests on a non-skid rubber disk attached to the bottom. A reversible stud and a reducer for 1/2" and 3/8" threads are also supplied. Weight 2.6 kg, ...

 The STV... stand extensions are screwed between microphone stands (for example MF 4, MF 5) and swivel mounts (for example SG 21/17 mt). Length 40, 200, 400 or 600 mm. Diameter: 19 mm.

Close range sounds, wind, and fast movements of the microphone boom, all may cause interfering noises. To avoid these unwanted sounds, windscreen accessories are available. Typically, they are made out of open-cell polyurethane foam. These ...

EA 89 AThe EA 89 A is designed for the U 89 i microphone. It has a swivel mount with a 5/8"-27 female thread, plus a thread adapter to connect to 1/2"- and 3/8" stands. Order Information