Lectrosonics Products

Headphone jack with nut for the Lectrosonics IFB R1A receiver.

Windscreen for M150 & M12 mic systems.

Battery charger for current model Lectrosonics rechargeable products and power supply for some LecNet components.  110/115 VAC input; 20 VAC output; 500 mA.

Lectrosonics R1A receiver shoulder washer.

Lectrosonics' Bias "T" is used to insert DC power into a coaxial cable to power a Lectrosonics remote antenna amplifier or filter/amplifier.  It is positioned at the receiving end of the coaxial cable to pass DC power from an ...

Adapter kit for Sony® camera slots.  Includes bezel, hardware, spare gasket and rear panel DB15 connector wired for power and audio connections.

To meet the demand for both extended operating range and extended battery life, the V series SM transmitters offer selectable output power ranging from 50 and 100 mW.  With higher power output, the perating range is improved at the ...

Optional carrying case for Lectrosonics' ALP600 antenna.

Power Supply for R400 Receiver; 90-240 VAC, 50/60 Hz input; 12 VDC (regulated), 400 mA max. output. 

High performance omnidirectional model with locking 5 pin (Switchcraft TA5F) plug (three wire configuration). Compatible with SM and UM series belt-pack transmitters. (Wired for 2-wire connection)

The R400 a is a high performance, triple-conversion, frequency synthesized, UHF receiver fully compatible with all Lectrosonics 400 series transmitters, and a number of analog models. The proprietary audio processing includes a DSP ...

Lightweight headworn microphone with bi-directional, noise cancelling element for increased gain before feedback with public address systems such as the Long Ranger III.  Adjustable mic boom and neckband for comfortable fit over the ...

General purpose soft vinyl case.  For use with a wireless system. 

Mic clip for M119 and M140 lavaliere mics. 

Keypad Membrane for the Lectrosonics HM wireless transmitter.

LCD assembly for Lectrosonics Venue modular receiver system.

Omni-directional lavalier microphone with locking 5-pin (Switchcraft TA5F) plug.

Lectrosonics' DCR12/A8U is a Power Supply for D4T and D4R; 100-240 VAC, 50/60 Hz input; 12 VDC (regulated), 800 mA max. output. 

The Lectrosonics A500RA23 is a UHF antenna with a right angle BNC connector for use with Lectrosonics Wireless products using the Block 23 operating frequencies, which covers 588.80 - 607.900 MHz and 614.100 - 614.300 MHz.

Battery door for Lectrosonics SMQV super miniature wireless microphone transmitter.

The ISO9VOLT battery eliminator allows Lectrosonics wireless transmitters with hinged battery doors designed for 9 volt batteries to be operated from external power sources. 10 to 18 volt DC is converted to regulated 9 volt DC to power the ...

Adapter for pre-wired connections between processor logic ports and RCWPB8 remote control.  Wired for the Lectrosonics DM Series.

The Mute switch is an active device that is powered by any 5 pin Lectrosonics transmitter including the new Servo Input transmitters such as the LMa, UM400a, and SMv series. It works with any 2 wire lavaliere microphone wired according to ...

The Lectrosonics PDR (Portable Digital Recorder) is designed for HD quality professional use. For situations in which the distance is extreme or where using a wireless microphone is not practical, the PDR recorder can travel with your ...