Power Supply for Venue Receiver; 90-240 VAC, 50/60 Hz input; 15 VDC (regulated), 1.6 A max. output, 18 W.

The RATPAC (Right Angle T connector PACkage) is a versatile kit for building a right angle connector for use with the SR receiver or Lectrosonics transmitters. The 3-pin configuration is normally used for the rear panel audio outputs of ...

For use with all transmitters, including IM, LM, UM400, SM Series, SMa Series, LMa and UM400a models.  Built-in JFET active preamp for optimum interface with instrument pickups.

12" power cable, Hirose4 to DC coax connector.  For powering old Lectrosonics receivers from cameras with Hirose power connector. 

Coaxial cables for remote antennas.  Made with Low-loss, flexible 9913F foam-core cable and special direct-coupled connectors.  Velcro tie wraps and straight BNC connectors on both ends.Loss dB: 2

Adapter cable, 37", mic level, XLRF to TA5F for all 5 pin transmitters. 

The D4T transmitter can accept up to four inputs from digital or analog sources. The inputs can be configured as follows: Four balanced analog inputs using all four jacks Two digital channels using jack 1 and two balanced analog ...

The D4R receiver employs two complete RF sections for true diversity reception. The signals from both antennas are independently decoded and error-corrected, and the diversity system uses all digital data and timing reference information ...

The D4 digital 4-channel wireless system was designed as a special purpose system for location production in film and television.A typical application for this system is in television production as part of what is commonly called a ...

For use with all transmitters, including IM, LM, UM400, SM Series, SMa Series, LMa and UM400a models.  Passive design for use with very high output instrument pickups such as electric bass guitars with 18 volt systems.

For use with all transmitters, including IM, LM, UM400, SM Series, SMa Series, LMa and UM400a models.  Passive design for use with very high output instrument pickups such as electric bass guitars with 18 volt systems.

Coaxial cables for remote antennas.  Made with Low-loss, flexible 9913F foam-core cable and special direct-coupled connectors.  Velcro tie wraps and straight BNC connectors on both ends.Loss dB: 1

Coaxial cables for remote antennas.  Made with Low-loss, flexible 9913F foam-core cable and special direct-coupled connectors.  Velcro tie wraps and straight BNC connectors on both ends.Loss dB: 1.9

Coaxial cables for remote antennas.  Made with Low-loss, flexible 9913F foam-core cable and special direct-coupled connectors.  Velcro tie wraps and straight BNC connectors on both ends.Loss dB: 4.6

Lectrosonics' 24" ARG2RT cable is commonly used for antenna connections in field production bag systems.

Coaxial cables for remote antennas.  Made with Low-loss, flexible 9913F foam-core cable and special direct-coupled connectors.  Velcro tie wraps and straight BNC connectors on both ends.Loss dB: 2.8

Waterproof connector kit containing all the necessary components for creating three watertight microphone plugs.

Pin 2 (+) with pins 1 and 3 jumpered 100 ohm attenuator

For use with all transmitters, including IM, LM, UM400, SM Series, SMa Series, LMa and UM400a models.  Built-in JFET active preamp for optimum interface with instrument pickups.