Power supply for IFB base transmitters and wireless equipment with a locking LZR power jacks. 110 VAC input, 12V DC regulated output. 400 mA max.

Adapter kit for Unislot® camera slots such as those provided on Ikegami® and Panasonic® cameras. Includes bezel, hardware and rear panel DB25 connector wired for power and audio connections.

Lightweight headworn microphone with bi-directional, noise cancelling element for increased gain before feedback with public address systems such as the Long Ranger III. Adjustable mic boom and neckband for comfortable fit over the ...

High performance omnidirectional model with locking 5 pin (Switchcraft TA5F) plug (three wire configuration). Compatible with SM and UM series belt-pack transmitters. (Wired for 2-wire connection)

To meet the demand for both extended operating range and extended battery life, the “V” series SM transmitters offer selectable output power of 100 or 250 mW. A third selection at 50 mW is provided for some theatrical ...

Audio cable for SR Receiver. TA3F plug to XLRM; 12" long.

Blank panel for RMP195/SDM4D/RDM4.

The HM172 "earset" microphone mounts securely to the user's ear with a comfortable, bendable silicone frame and provides excellent vocal quality in a nearly invisible package. The cable runs neatly behind the neck for maximum ...

Wireless IFB (interruptible fold back) systems are used for talent cueing and crew communications in broadcast and motion picture production. In other cases, the IFB system is used by directors and other management to monitor program audio ...

Battery charger for current model Lectrosonics rechargeable products and power supply for some LecNet components. 110/115 VAC input; 20 VAC output; 500 mA.

Clip for M150 or M152 lavalier mic.

Power Supply for Venue Receiver; 90-240 VAC, 50/60 Hz input; 15 VDC (regulated), 1.6 A max. output, 18 W.

The RATPAC (Right Angle T connector PACkage) is a versatile kit for building a right angle connector for use with the SR receiver or Lectrosonics transmitters. The 3-pin configuration is normally used for the rear panel audio outputs of ...

The DM1612F is a digital audio processing, mixing, and routing system. The promary applications are sounds reinforcement and conferencing in boardrooms, courtrooms, houses of worship, hotel, and other applications with multiple ...

To meet the demand for both extended operating range and extended battery life, the V series SM transmitters offer selectable output power ranging from 50 and 100 mW. With higher power output, the perating range is improved at the ...

With its slim, elegant design that feels right at home in one’s hand, the new HH transmitter accepts standard thread-on capsules from a number of manufacturers. This gives users the freedom to select the microphone capsule that is ...

General purpose soft vinyl case. For use with a wireless system.

The Lectrosonics IFBT4 UHF transmitter was designed for use in broadcast, motion picture, theater, and stage applications where extended operating range and high quality audio are essential. The IFBT4 can be used as a stand-alone device or ...

The ISO9VOLT battery eliminator allows Lectrosonics wireless transmitters with hinged battery doors designed for 9 volt batteries to be operated from external power sources. 10 to 18 volt DC is converted to regulated 9 volt DC to power the ...

The ALP Series antennas are a Log Periodic Dipole Array (LPDA) design that provides a useful directional pattern over a broad frequency bandwidth. Most "gain antennas" (those designs with a directional pattern) are limited in bandwidth. ...