The PT-101R is a high performance RF line amplifier. It takes one RF (CATV/MATV) signal and amplifies it for long cable and remote distribution applications.High Bandwidth - 40-3000MHz.  Gain - + 20dB typical across band.  ...

List Price: $110.00
Our Price $88.00
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

The Kramer PT102A is a high performance audio distribution amplifier for unbalanced stereo signals. It will take one stereo input and distribute the signal to two identical stereo outputs.Level (Gain) Controls.  S/N Ratio - ...

List Price: $110.00
Our Price $88.00
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

Kramer's PT-1CAT5 is a line protector for network signals.  This unit is used in plug & play applications to prevent damage to sensitive equipment as a result of ESD (Electrostatic discharge), lightning or transient voltage ...

List Price: $145.00
Our Price $116.00
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

The PT-1FW is a line protector for FireWire signals. It is used in Plug and Play applications where constant plugging and unplugging of FireWire equipment can result in permanent damage to sensitive equipment due to ESD (electrostatic ...

List Price: $90.00
Our Price $72.00
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

The Kramer PT-1H is a high quality horizontal sync delay for computer graphics video signals on twisted pair or coax cables. It allows horizontal picture shift to be corrected in long cable runs when the horizontal sync signal is delayed. ...

List Price: $250.00
Our Price $200.00
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

The PS-1PS is a power supply for Kramer Power Connect™ Products. It adds 12V DC on the CAT 5 cable. Input/Output – 2 RJ-45 Compact Size - Part of the Kramer MultiTOOLS™ family of compact, high quality and cost effective ...

List Price: $150.00
Our Price $120.00
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

The PT-4IR is an infra-red signal repeater that can operate at distances up to 75meters.  This model will allow the extension of infra-red signals in areas where there is no direct line-of-sight for normal infra-redsignal operation. ...

List Price: $295.00
Our Price $236.00
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

Kramer's PT-4iREX is an infrared signal repeater that can operate at distances up to approximately 250 feet (75 meters).  This model will allow the extension of infrared signals in areas where there is no direct line-of-sight for ...

List Price: $295.00
Our Price $236.00
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

The RC-8IR is an 8-button controller for multimedia rooms. It controls A/V components as well as lights or screens. Each button has 15 commands for up to 120 total commands in one gang wall plate. It features an Ethernet port for easy ...

List Price: $695.00
Our Price $556.00
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

The Kramer RC-IR1 is a high performance remote control device for most Kramer RS-232 controlled machines. The system is comprised of a hand held remote transmitter and a remote receiver: built-in or external (connected to the RS-232 port ...

List Price: $190.00
Our Price $152.00
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

The RC-1000N is a programmable remote control for Kramer switchers with RS-232 and RS-485 control interfaces. This wall plate unit can control up to 16 matrix switchers.* Configurable Back-Lit Buttons - Functions and/or macros are ...

List Price: $995.00
Our Price $796.00
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

The RC-1616 is an external Ethernet based remote control panel for the VP-128H matrix switcher. Up to 512 RC-1616 can be connected to one VP-128H matrix switcher. Ethernet based Control - Connect up to 512 RC-1616’s to one VP-128H ...

List Price: $750.00
Our Price $600.00
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

The Kramer RC-3000 is a Master Programmable Remote Control System, designed for broadcast and industrial studio applications. It can control the latest Kramer switchers and can be easily upgraded to be used with future Kramer switchers. ...

List Price: $620.00
Our Price $496.00
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

For 26/28 AWG Mini Coax.Specifications: Center Conductor: 0.015 - 0.025 inch / 0.381 - 0.635 mm Dialectric:  0.065 - 0.078 inch / 1.651 - 1.9812 mm Outer Jacket: 0.095 - 0.160 inch / 2.413 - 4.064 mm

List Price: $4.30
Our Price $3.44
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

Specifications Center Conductor: 0.0399 - 0.0418 inch / 1.0135 - 1.0617 mm Dialectric: 0.180 - 0.193 inch / 4.572 - 4.9022 mm Outer Jacket:  0.265 - 0.305 inch / 6.731 - 7.747 mm

List Price: $3.90
Our Price $3.12
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

For VM10AN, VS6EII

List Price: $50.00
Our Price $40.00
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

 Rack adapter for mounting a Kramer TOOLâ„¢ and two Kramer PicoTOOLSâ„¢ into a 19', 1RU rack space.

List Price: $90.00
Our Price $72.00
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

Rack adapter for mounting two Kramer TOOLSâ„¢ (extruded or regular) and a Kramer PicoTOOLSâ„¢  into a 19" 1RU rack space.

List Price: $90.00
Our Price $72.00
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

19" rack adapter for mounting 3 Kramer "TR" Series TOOLSâ„¢ into a 19" 1RU rack space.

List Price: $90.00
Our Price $72.00
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!

Rack adapter for mounting 4 Kramer PicoTOOLSâ„¢ into a 19" 1RU rack space.

List Price: $90.00
Our Price $72.00
You save 20%!
Usually ships in 2-3 weeks
Need it sooner? Call us!