Jensen Transformers Products

Dual Line Output Module - 1:1 Bifilar Windings: Distortion 0.035% typ at 20 Hz and +4 dBu output level Wide bandwidth: -3 dB at 0.2 Hz and 15 MHz Drives 600 ohm loads to levels up to +21 dBu at 20 Hz Excellent time domain ...

When inserted into standard 75 Ohm video cabling, this transformer-based isolator eliminates video "hum bars", as well as the often-associated audio "hum" or "buzz" in multimedia entertainment systems, by breaking the so-called ...

Low frequency audio isolator - ideal for 2 channel sub-woofer applications. The specially designed transformers in this unit provide unparalleled low frequency response while providing over 100dB of common mode isolation, to solve even the ...

This capacitive based isolator provides a high impedance barrier to AC power related ground currents, preventing hum or buzz in sound systems or .hum bars. in video systems, while providing a transparent path for radio frequency video and ...

Designed to provide over 90dB of common mode isolation at 60Hz and to help eliminate R.F. interference from radio and television stations. Transformer isolation allows maximum interconnection flexibility, since both sources and loads ...

This transformer is designed for use in wideband line input stages. The secondary source impedance of only 225 Ohms is an excellent match to ultra-low noise amplifiers. The primary is fully balanced and its leads may be reversed to invert ...

Video ground loop corrector - for 75 ohm systems. 56dB of CMRR typ at 60Hz minimizes ground loops DC to 900MHz bandwidth for excellent picture quality Greater than 1 VRMS 60Hz common-mode level handling VSWR under 1.1 at 100MHz to ...

Jensen Transformers' ISO-MAX® VBH-5BB reduces ground current induced video interference such as hum bars by a factor of over 100, eliminating the visible effects of these types of interference. The high bandwidth and low ...

Jensen Transformers' ISO-MAX® VBH-1SS reduces ground current -induced video interference such as "hum bars" by a factor of over 100, eliminating the visible effects of these types of interference. The high bandwidth and low ...

Jensen Transformers' DIN-LO-11FL module is designed for high-performance line output stages. The 50% nickel alloy core gives it excellent distortion and level handling at a cost allowing many applications to enjoy the advantages of ...

Ideal for use with subwoofers and mono-block amplifiers where use of a stereo unit would be impractical.Features: Ruler-flat frequency response preserves "Audiophile Quality" signals High-grade nickel-iron-molybdenum alloy cores for ...

Designed specifically for subwoofer amplifier isolation in home theater and automotive applications.Features: Transformer ratio optimized for 0dB insertion loss in typical applications Special input transformer delivers unparalleled ...

Designed to provide over 90dB of common mode isolation at 60Hz while converting "Pro" +4dBu signals to "Consumer" -10dBV signals. Transformer isolation allows maximum interconnection flexibility, since both sources and loads may be ...

Provides 56dB Reduction in Ground LoopsDC to 900MHz BandwidthLow VSWR Prevents Signal DegradationLow Insertion Loss for High S/N Ratio

Single channel unit provides ground isolation at inputs or outputs. Designed especially for patch bay and long line applications.NOTE: Similar product shown above

Single channel unit provides ground isolation at inputs or outputs. Designed especially for patch bay and long line applications. See data sheet for drawings and specifications.

3RU 19" rack mounting panel adaptor (for up to 12 modules).

Designed to provide over 100dB of common mode isolation at 60Hz and to help eliminate R.F. interference from radio and television stations. Transformer isolation allows maximum interconnection flexibility, since both sources and ...

This module is designed for use in wideband line input stages. Distortion remains very low and CMRR remains high, even when driven by high-source impedances. The primary is fully balanced and its terminals may be reversed to invert ...

This direct box is designed to provide over 100dB of common mode isolation at 60Hz while converting line level +4dBu signals to microphone level -38dBu signals. Transformer isolation allows maximum interconnection flexibility, ...