Heil Sound Products

The Heil Sound PL2T "Topless" mount is a unique and versatile boom that utilizes a system of perfectly balanced internal springs to provide perfect balance and silent, effortless adjustment of its position. The PL2T easily handles ...

Heil Sound's RC 35 contains the 1.5" large dynamic element of the PR 35 which produces a wide frequency response, natural vocal articulation and high rear rejection from the sides and rear.This Heil replacement capsule is interchangeable ...

The WM-1 is a unique mount for the Heil booms that allows them to be mounted on a vertical surface. The brass insert of the WM-1 insures smooth, perfect fit.

The PR 22UT has been designed for commercial broadcast, recording and live sound reinforcement applications. This is a very rugged microphone, which makes it ideal for professional use where exceptionally low handling noise is ...

The PR 35 has been designed for commercial broadcast, recording and live sound reinforcement applications which require a smooth flat response over a wide frequency range. The PR 35 was designed around the acclaimed PR 30 element and ...

Heil Sound's PR 28 is the premier drum microphone designed for toms, snares, bongo and many other applications. The tight cardioid pattern with a wide frequency response and stellar rear rejection makes the PR 28 suitable for ...

The Heil PR 22 represents completely new dynamic microphone technology designed for a wide range of professional applications such as live sound, commercial broadcast, and sophisticated recording. Its wide frequency range and outstanding ...

The Heil PR 40 represents completely new dynamic microphone technology designed for a wide range of professional applications such as sophisticated recording, live sound, and commercial broadcast. Producing the widest frequency range ...

The Heil Sound SB-2 Small Boom is ideal for mounting your Heil microphone in tight quarters. It is also ideal for interviews. Compact and yet rugged, the SB-2 Small Boom fits easily into many briefcases, allowing you to carry the SB-2, the ...

The DT-1 is a flush mount for the PL2T. Drill a 1.5" hole in the desk top, then tighten the large washer and nut of the DT-1 from below the desk. This creates the ultimate in a classy mount for all Heil booms.

(note: HH1 in the first image is shown with a PR28 microphone, which is not included)The HH-1 mounts (patent pending) are provided as the tom mounts of the PR 28. The HH-1 is a unique mount, fully adjustable so you can mount on the rim or ...

Heil Sound's PR 48 kick drum microphone features a 1.5" large diaphragm dynamic element sealed in a vulcanized shock-mount and fed with a specially designed low pass filter that creates a 10 dB rise from 60 to 100 Hz - right where the kick ...

The Heil PR 30 represents completely new dynamic microphone technology designed for a wide range of professional applications such as sophisticated recording, live sound, and commercial broadcast. Its smooth, wide frequency range sounds ...

The Heil PR 30 represents completely new dynamic microphone technology designed for a wide range of professional applications such as sophisticated recording, live sound, and commercial broadcast. Its smooth, wide frequency range sounds ...

The SM-2 Shock Mount is a flexible support system that helps suppress low-frequency rumble on the microphone line by absorbing and damping vibrations picked up from the studio desk or console.The SM-2 is designed for use with the ...

The RS-1 is a 12" riser that allows you to mount the Heil PL2T behind your desktop equipment and pull the PL2T over to you. It's a very classy way to position your Heil microphone. The brass insert accepts a 1/2" Stem. For use ...

The Heil Sound RC-22 Screw-on Mic Capsule features that same microphone element found in the Heil Sound PR-22 microphone. The screw-on capsule is intended for use with third-party handheld mircophone transmitters that receives a ...

The HB-1 is an articulated arm which has a subtantial steel channel structure and is balanced by four external springs. It is capable of supporting microphones up to 2.5lbs and has a reach of 40". The HB-1 is shipped with a ...

Heil Sound's PR 20 UT (Utility) comes with a stainless mesh grill, a foam windscreen, and a mic clip in a vinyl zipper bag. Specifications and performance characteristics remain at the high level that the PR 20 brings, wide ...

Heil Sound's HDK-5 includes: Four Handi Mic Pro Plus Dynamic MicsTwo HH-1 mounts (patend pending)One PR 48Four HM mic clipsOne black carrying caseHandi Mic Pro Plus Features: Designed for a wide range of pro applications (live sound, ...