Galaxy Audio's CHECK MATE is an inexpensive tool that meets the same IEC 651 Type 2 standards of SPL meters that cost 5 times as much or more.  The CHECK MATE allow musicians, sound contractors, and others to measure ...

Features: Splits a single monitor feed to as many as four CORE PA5X140s (or other powered monitors). Splits a single headphone feed to multiple headphones. Balanced TRS inputs and outputs.Galaxy Audio's JIB/S allows you to ...

Features: Combines (sums) two stereo CD or tape players into one mono (XLR or ¼ inch) output Frees mixer channels Phantom block on the XLR prevents phantom power from reaching CD/Tape players connected to the RCA jacksEver ...

Many of the same features as the CM-100 but at a lower price. It features a max function resolution of 0.5 dB with accuracy of ± 2.0 dB, range of 40-130 dB with 30dB of dynamic range covering 125Hz-8kHz. Battery life 110 hours. ...

The Mic Boom Adaptor mounts to the top of a PA6S, PA6SR, or HS7. This adaptor allows most microphone booms to be mounted on the top of the Hot Spot to eliminate the need for a stand for the Hot Sport and a stand for the microphone and ...

Features/Specifications: 4.72" x 4.9" x 1.57" 2.65 lbs Zinc die-cast On/off switch & LED indicator Accepts XLR Gooseneck microphone XLR Output

For use with Galaxy Audio's HSE/HSD headset mics, this cable features a TA4F connector and helps you replace cables for your Shure-ready headset mics without having to replace the whole microphone.

Galaxy Audio's SAYBSA-0 is a black yoke mic stand bracket.

Spun aluminum stand adapter for mounting a HOT SPOT, CORE PA-5, CORE PA5X140, or Traveler on KM series mic stands (without removable locking ring).

For use with Galaxy Audio's HSE/HSD headset mics, this cable features a 3.5mm connector and helps you replace cables for your Sennheiser-ready headset mics without having to replace the whole microphone.

Spring loaded clip works great for wireless microphones.

Wall/ceiling mount retrofit for Hot Spot PA speakers.  (Comes in black or white.)

5-pack of beige windscreens for HSO omni headset mics.

Various combinations of two RM Series modules can be installed into Galaxy Audio's 1RU RM2 rack chassis.  The RM2 supplies power and provides useable rear panel inputs and outputs to the modules.  The RM2 features dedicated ...

Holds either Galaxy Audio's CHECK MATE CM-130 or CM-140.  Nylon belt loop for convenient hip holster access.  Velcro® locking cover to secure SPL Meter safely in holster.

Extended range of measurement from 50-130dB w/ +/-1.5dB accuracy. Perfect for industrial measurements, factory worker safety, or any other loud environment. Freq. range 31.5-8kHz, & can be software controlled and tripod mounted ...

Galaxy Audio's Cable Tester (JIB/CT) was designed to test cables quickly and simply. The CT tests 6 different types of cables, XLR, 1/4", RCA, 1/8", Speakon, and DIN (MIDI). The CT features a specially designed microprocessor, which tests ...

Gqlaxy Audio's CM160 is the latest in the line of Galaxy Audio SPL Meters. The CM160 is similar to our model CM150, except that it has an internal hard drive, which records the SPL and allows it to be transferred to a computer at a later ...

Add an additional microphone to the CORE PA5X140 (or other powered monitor) when all inputs are in use.Permits phantom power to go to both microphones if available from the console.Galaxy Audio's JIB/C is designed for those situations when ...

Galaxy Audio's Cricket can test the polarity of wireless microphones, mixers, effects devices, amps, cables and speakers. Polarity, should it become reversed, can play havoc with a sound system. If two sources are emitting the same ...