Wall/ceiling mount bracket kit for Electrovoice Sx300, Sx100+, SxA100, and Sb121 model speakers.

The F200 Monitor Foot kit contains two plastic feet, two "O" rings and two screws. Locate the "O" rings in the groove on the plastic feet. These "O" rings lock the feet in position and allow the feet to be removed without ...

Forged 3/8-16 Eyebolt Kit, 3-pack

The Electro-Voice Sx80MB is a mounting bracket for installing the Sx80 loudspeaker on a wall or a ceiling. The kit consists of two nylon washers, two friction washers, two M6 x 20 mm phillips pan washer head screws, and one ...

Round Grille for 8" Speaker, White

Wall/ceiling mount bracket kit for Electrovoice Sx300, Sx100+, SxA100, and Sb121 model speakers.

The EBK-1 attachment kit contains three lifting eyebolts which screw into the inserts provided on the EVI-12 and EVI-15 speakers. The lifting eyebolt attachment points can then be used to suspend the EVI speakers using hardware rated ...

The CB5 Array Rigging Kit features array brackets and hardware that allow you to array any Zx5 system. Its assembly isquick and easy with the hardware already provided on your Zx5 Loudspeaker.

Eyebolt extension kit for Electrovoice SX200/300 or SB120/121 loudspeakers.

Mounting Bracket Kit for EV S40 speakers.

AB-ZE (P/N 301918-001)The AB-ZE is a versatile array bracket that is used to suspend EVID or ZX1i loudspeaker arrays, using a unique designto minimize assembly time. The AB-ZE kit is compatible with EVID 3.2, EVID 4.2, EVID 6.2, ZX1i-90 ...

MB5 Wall/Ceiling Mounting Bracket KitThe MB5 Wall/Ceiling Mounting Bracket Kit features robust brackets and hardware that allow for a Zx5 loudspeaker to bequickly and easily mounted to a wall or ceiling in almost any position to obtain the ...

Single Stud Rigging Kit for the ZX3 series Loudspeaker. Set of 3.

Fly Kit for SKA250

For the EVI-28, the mounting holes are positionedvery near the center of gravity for easy aiming.The U-brackets may be rotated all the wayaround the back of the enclosure, allowing easy installationand aiming. The maximum vertical ...

Mounting Bracket Kit for EV S40 speakers.

The Mb500 installation kit consists of a U-bracket, two mounting plates, eight M8 x 1.25 hex-head bolts, eight 5/16 lock washers, two M12 x 1.75 hex-head bolts, two 3/8 lock washers, two friction washers, two 1/2 lock washers, and two ...

Includes spacers and detachable hang points.

For the EVI-12 and EVI-15 the physicalmounting of the systems have been designed to beas easy as possible. By far, the easiest solution is to use the optionalsturdy, cost effective EVI-12MB orEVI-15MB U-Brackets that mount to the ...

The Mb300 horizontal array kit contains two brackets and eight of each of the following: 5/16-18 x 1 hex-head bolts, 5/16 lock washers, 5/16-18 nuts. The Mb300 is used in conjunction with the Mb200 installation bracket to create a ...